Ariston HW65/9H Manual de instruções - Página 15

Procurar online ou descarregar pdf Manual de instruções para Aquecedor de água Ariston HW65/9H. Ariston HW65/9H 39 páginas.

press power switch for the second time at this point, then the system will quit operation and change

to standby. The next time the system is initiated, repeat above steps.

Note: The default operation mode is standard mode.

8. Operation Mode Option

After being turned on and displayed as intelligent heating pump, the system would automatically

choose the best energy-saving way to heat the water. If you push "Fast Wash" button at the

operation interface then fast wash heating mode is activated. You can also terminate fast wash

function by pushing "Fast Wash" button after it is activated. When the water temperature reaches

setting degree then fast wash function, which heats the water in a way that takes minimum time,

will terminate automatically and switch back to intelligent heating pump.

Turn on the system and enter operation interface, then press "mode" button to enter operation

mode selection, there are three modes, "timing mode", "night mode" and "standard mode". If you

press switch button for a long time after the system is turned on, then "sleep mode" will be

activated.

Activate "Timing Mode" under the instruction described in 8.2 and the system will automatically

choose the right operation mode according to assigned time because it is a preset mode which

allows the user to set mode time and temperature by pressing "Setting" button then the system will

heat the water in advance to the temperature set previously.

Note:

* The time window available to the user is half an hour

* The time set by the user is when he/she would use the water and there are two time points

available. The system will automatically calculate the real-time data and activate heating mode

according to the result. When timing 1 is in operation, it will flash and it's exactly the same with

timing 2.

Activate this mode under the instruction described in 8.2 and the system will automatically select

the suitable mode to heat the water from 23:00 pm to 6:00 am to the temperature set previously.