Aeotec ZWA019 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Acessórios Aeotec ZWA019. Aeotec ZWA019 9 páginas. Water sensor
Também para Aeotec ZWA019: Manual (3 páginas), Manual do utilizador (13 páginas), Manual do utilizador (9 páginas)

Imprimir página
Aeotec ZWA019 Manual do utilizador
Functions of Water Sensor 7 Pro.
Water leak
Once installed, this sensor will report wet or dry via Notification Command Class when this devices is wet or removed
from water.
Notification Report
Type: Unknown (0x05)
Value: Wet (0x02) or Dry (0x00)
Tamper
Tamper alarm will be sent if the cover is removed.
Notification Report
Type: Tamper Removed (0x07)
Value: 0x03
Temperature
This sensor will report occasionally on its own as an unsolicited Multilevel Sensor Report either by a timed interval
(Parameter 18) or by the change in value (Parameter 16).
Multilevel Sensor Report
Humidity
This sensor will report occasionally on its own as an unsolicited Multilevel Sensor Report either by a timed interval
(Parameter 18) or by the change in value (Parameter 17).
Multilevel Sensor Report
LED indicator.
Function Description
Device Not in Network
Include/Exclude/Learn Mode
Local Reset
LowBatt
LED Indicator
Blinks red for 5 seconds (1 sec duty cycle) when battery is
inserted and sensor is not in network
Illuminate green for 3 seconds when Inclusion / Exclusion /
Configuration is successful.
Illuminate red for 3 seconds when Inclusion / Exclusion /
Configuration is unsuccessful (upon a timeout of 30 seconds).
When device is locally reset to Factory Default LED blinks red (1
second duty cycle) for 5 seconds.
When operation button is Short Pressed the LED blinks red three
time (1 sec duty cycle)