Aeotec Dual Nano Switch ZW140 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Interruptor Aeotec Dual Nano Switch ZW140. Aeotec Dual Nano Switch ZW140 15 páginas.
Imprimir página8-7-2019
Notes for the wire connection ports:
N – Power input for neutral
L – Power input for live
IN – Input for load power supply
OUT1 – Output for load 1
OUT2 – Output for load 2
S1 – External switch control for load 1
S2 – External switch control for load 2
Important safety information.
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The
manufacturer, importer, distributor, and / or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other
materials.
The maximum amperage rating for Dual Nano Switch should not exceed 5 amps per load.
Keep product away from open flames and extreme heat. Avoid direct sun light or heat exposure.
Install the Dual Nano Switch.
Dual Nano Switch installs behind a lighting switch or a momentary push button. It works with only 3-wire (with neutral) lighting setups, though each installation of Dual Nano
Switch is accordingly slightly different:
1. Shut off the main circuit breaker of your home for safety during the installation and ensure the wires are not short circuited during the installation which will cause damage to
the Dual Nano Switch.
Note: Your home's main circuit breaker must support the overload protection for safety.
https://aeotec.freshdesk.com/support/solutions/articles/6000178928-dual-nano-switch-user-guide-zw132-and-zw140-
Dual Nano Switch user guide : Aeotec Group
2/15