Dini Argeo HLD Series Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Balanças Dini Argeo HLD Series. Dini Argeo HLD Series 13 páginas. Laboratory scale, industrial weighing systems

Imprimir página

P CONT

In this transmission mode the instrument transmits continuously the following data format depending on the functioning

mode:

Totalisation Mode

ST,GS,XXX.XXXXkg<CR><LF>

Counting Mode

PCS:XXXXXXXXpcs<CR><LF>

Percentage Mode

PERC:XXXXX.XX%<CR><LF>

9. ERROR MESSAGES

ERROR MESSAGES

- - - - - -

Err 4

Err 5

Err 6

RECYCLING INSTRUCTION

The crossed-out wheeled bin on the product means that at the product end of life, it must be taken to

separate collection or to the reseller when a new equivalent type of equipment is purchased. The

adequate differentiated refuse collection in having the product recycled, helps to avoid possible

negative effects on the environment and health and supports the recycling of the materials of which

the equipment is made. The unlawful disposal of the product by the user will entail fines foreseen by

the current regulations.

GS for gross weight, NT for net weight, XXX.XXXX is the weight

XXX.XXXX is the Number of pieces

XXXXX.XX is the Percentage of weight

DESCRIPTION

RESOLUTION

Over range

Remove weight from the scale.

Zero Setting Error

Upon start-up or when the ZERO key is pressed, the weight on the

scale exceeds the percentage programmed on the max. capacity.

Remove the excess weight and retry.

Keyboard Error.

The keyboard could be damaged.

Input signal greater

Indicates that the A/D converter value is greater than the maximum

than 3mV/V

value:

- Remove the weight from the scale if it's exceeding.

- The load cell or the electronics could be damaged.