Ariston STI 210 INDIRECT Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Caldeira Ariston STI 210 INDIRECT. Ariston STI 210 INDIRECT 16 páginas. Unvented hot water storage cylinders
Também para Ariston STI 210 INDIRECT: Manual de instruções de instalação (20 páginas), Manual de instruções de instalação (24 páginas)

Ariston STI 210 INDIRECT Manual do utilizador
FIG. 6
300L AND 500LONLY
FROM BRONZE
PUMP
DRAIN
FLOW
RETURN
- 20 -
SECONDARY
RETURN
NON-RETURN
SUGGESTED WAYS OF TERMINATING
DISCHARGING PIPES SAFETY
Temperature & pressure
Metal discharge pipe (D1) from
relief valve
temperature & pressure relief valve.
to tundish.
500 mm Max.
300 mm
Min.
Metal discharge pipe (D2) from tundish
with continuous fall. See Table 2 and worked
example.
Table 2. Sizing of copper discharge pipe "D2" for common temperature valve outlet sizes.
Valve outlet size
Minimum size of
discharge pipe D1*
G ½
15 mm
G ¾
22 mm
G 1
28 mm

WORKED EXAMPLE

The example below is for a G ½ Temperature & Pressure Relief valve with a discharge pipe
(D2) having 4 no. elbows and length of 7m from the Tundish to the point of discharge.
From Table 2
Maximum resistance allowed for a straight length of 22mm copper discharge pipe (D2) from G
½ T & P valve is 9m.
Subtract the resistance for 4 no. 22mm elbows at 0.8m each = 3.2m.
Therefore the maximum permitted length equates to: 5.8m.
As 5.8m is less than the actual length of 7m therefore calculate the next largest size.
Maximum resistance allowed for a straight length of 28mm pipe (D2) from G ½ T & P valve
equates to: 18m.
Subtract the resistance for 4 no. 28mm elbow at 1.0m each = 4m.
Therefore the maximum permitted length equates to: 14m
As the actual length is 7m, a 28mm (D2) copper pipe will be satisfactory.
y y
y y
FIG. 7
y y
y y
Tundish
y
y
Discharge below
fixed grating.
y y
y y
(see page 6 for
alternative points
of discharge).
Fixed grating
Trapped gulley
Minimum size of
Maximum
Resistance created
discharge pipe D2*
resistance allowed,
by each elbow or
from tundish
expressed as a
length of pipe (i.e.
no elbow or bends)
22 mm
Up to 9 m
28 mm
Up to 18 m
35 mm
Up to 27 m
28 mm
Up to 9 m
35 mm
Up to 18 m
42 mm
Up to 27 m
35 mm
Up to 9 m
42 mm
Up to 18 m
54 mm
Up to 27 m
- 21 -
bend
0.8 m
1.0 m
1.4 m
1.0 m
1.4 m
1.7 m
1.4 m
1.7 m
2.3 m