Aeotec MULTISENSOR 6 Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Sensores de segurança Aeotec MULTISENSOR 6. Aeotec MULTISENSOR 6 13 páginas. Z-wave water and flood sensor
Também para Aeotec MULTISENSOR 6: Manual do utilizador (13 páginas), Manual (3 páginas), Manual do utilizador (8 páginas), Manual (10 páginas)

Aeotec MULTISENSOR 6 Manual do utilizador
Multisensor 6 user guide : Aeotec Group
Keep product and batteries away from open flames and extreme heat. Avoid direct sun light or heat exposure. Always
remove all batteries from products that are being stored and not used. Batteries may damage the appliance if they
leak. Do not use rechargeable batteries. Ensure correct polarity when inserting the batteries. Improper battery use
may damage the product.
Contains small parts; keep away from children.

Quick Start.

Set Up Your Power
MultiSensor 6 can be powered by battery or by USB with an appropriate adapter. For the purposes of installation and
setup, even if you intend to power your sensor with batteries, we recommend using the provided USB cable for
setup. For this, you'll need an adapter to plug your USB cable into; this can include any computer USB port and
most smartphone chargers. These steps can be performed in any location within your home, and not necessarily in
your MultiSensor 6's final installation location.
For a USB powered installation:
1. Remove the battery cover by sliding the Unlock button and separating the two parts of your Sensor.
2. Insert the smaller end of the provided USB cable into your sensor's USB port.
3. Insert the larger end of the USB cable into a computer or adapter. Your MultiSensor 6 is now powered on.
4. Make sure to seat the Battery Cover back onto the MultiSensor 6 and lock it in.
For a battery powered installation:
1. Remove your sensor's rear cover as shown in the previous step.
2. Insert two CR123A batteries orientated according to the diagram within your sensor. Your MultiSensor 6 is now
powered on.
https://aeotec.freshdesk.com/support/solutions/articles/6000057073-multisensor-6-user-guide-
29-09-2020 17:00
Pagina 3 van 13