Ariston FD 96 P Manual de instruções de instalação e utilização - Página 33
Procurar online ou descarregar pdf Manual de instruções de instalação e utilização para Forno Ariston FD 96 P. Ariston FD 96 P 50 páginas. Multifunction oven with self-cleaning by fast clean
Também para Ariston FD 96 P: Manual de instruções de instalação e utilização (15 páginas)
Imprimir página
Programmed cooking with immediate start
Cooking starts immediately and comes to an automatic
stop when the end cooking time is reached.
Proceed as follows:
•
set the mode selector to the selected mode,
•
set the temperature using the temperature selector
knob (in steps of 10° at a time) if the recommended
one is not to your liking,
The grill display indicates a power level between 1 and 5
(1 for minimum power and 5 for maximum power).
•
a recommended cooking time is associated with
each cooking mode. You may change the
recommended cooking time by pressing
"+" and/or "-" (cooking time must include approximately
10 minutes for the oven to pre-heat). The cooking time
is memorised, but you still have another 3 seconds to
modify it.
During the pre-heating phase, symbol
the cooking time is displayed. When pre-heating is
done, symbol
stops blinking and the oven emits 3
acoustic beeps.
There is no pre-heating phase when using the "fast
cooking" and "grill" modes.
The amount of time left until cooking is done is displayed
during cooking. To see the temperature, press key "+".
The minimum programmable cooking time is 2 minutes.
The maximum programmable cooking time is 10 hours.
press key
to start cooking.
•
If you fail to press the cooking start key one minute after
having selected a mode, the word "END" comes up on
the display and the keys are disabled. In this case, set the
mode selector back to "0" and proceed with the various
adjustments.
When cooking is done, an acoustic signal sounds for
one minute and the word "END" comes up on the
display; you can stop this acoustic signal by pressing any
of the keys.
•
Set the mode selector knob back to "0": the word
"END" disappears and "OFF" comes up for 3 seconds.
During cooking, you can change the cooking mode
(without affecting the cooking time or temperature), the
temperature (without affecting the cooking time) and the
cooking time.
You can bring the cooking to a stop and turn the oven off
just by setting the mode selector knob to "0". In this case,
the word "OFF" is displayed for 3 seconds before it comes
off.
Programmed cooking
Programmed cooking with delayed start
The programmer automatically selects the cooking start
time according to the parameters you have set: cooking
time and end cooking time.
Proceed as follows:
•
•
knob if the recommended one is not to your liking,
The grill display indicates a power level between 1 and 5
(1 for minimum power and 5 for maximum power).
•
•
and keys
" (cooking time should include the pre-heating time):
the cooking time is memorised, but you still have
another 3 seconds to modify it.
•
time by pressing
blinks and
the end cooking time is memorised, but you still have
another 3 seconds to modify it.
The minimum programmable cooking time is 2 minutes.
The maximum programmable cooking time is 10 hours.
•
From the time of your programming to the start of cooking,
only the temperature and the mode can be modified.
When the cooking start time has been reached, the oven
is turned on and pre-heating begins, during which symbol
blinks; the cooking time is displayed.
When pre-heating is done, cooking starts, symbol
stops blinking and the oven emits 3 acoustic beeps.
There is no pre-heating phase when using the "fast
cooking" and "grill" modes.
•
33
set the mode selector to the selected mode,
set the temperature using the temperature selector
press key
to set the cooking time,
set the cooking time by pressing keys "+" and/or "-
to delay cooking, you need to set the end cooking
and then "+" and/or "-" repeatedly:
press key
, symbol "A" comes on.
Set the mode selector knob back to "0".