AEP MP2x8i NMEA Buffer Manual de instalação e do utilizador
Procurar online ou descarregar pdf Manual de instalação e do utilizador para Equipamento marítimo AEP MP2x8i NMEA Buffer. AEP MP2x8i NMEA Buffer 2 páginas. Buffer
Também para AEP MP2x8i NMEA Buffer: Manual de instalação e do utilizador (9 páginas)
Imprimir página
MP2x8i NMEA Buffer
Installation and user manual
The MP2x8i NMEA Buffer isolates and buffers NMEA 0183 data or other RS422 signals.
It is able to distribute the NMEA signal from two Talkers up to eight Listeners. As the (power)
input and output ports are isolated the device ensures the protection of the Talkers and
Listeners. The MP2x8i features two operating modes; auto-switching mode and dual mode.
In auto-switching mode you are able to connect two independent Talkers and distribute the
signal to eight Listeners. In dual mode the buffer can be used as two independent buffers with
one input and four outputs.
Features
RINA type approved & IEC60945 certified
Number of input ports: 2 (RS232 or RS422)
Number of output ports: 8 (RS422)
Input/output speed (baud rate): 4800 to 230400 bps
Individually OPTO isolated input and output
Isolated 24 VDC (9-36 VDC) power supply (over voltage protection up to 37VDC)
Power consumption: 0,6W at 24VDC
Galvanic isolation: Power supply 1,5kVDC, signal input/output up to 5kVRMS
Reverse polarity input protection
Pluggable PCB terminal block for easy access and installation
Connector: Cable diameter up to 1,5 mm (2,5 mm without ferrule)
Dimensions: Length 155,5 mm x Width 68,0 mm x Height 32,0 mm
Mounting: Wall mount (using four screws)
Weight: 200 gr.
Accessories
Cable holder
DIN-rail clip
TYPE
APPROVED
Screwless terminal blocks