Whirlpool 3XLBR8543 Manual de utilização e cuidados - Página 12
Procurar online ou descarregar pdf Manual de utilização e cuidados para Máquina de lavar roupa Whirlpool 3XLBR8543. Whirlpool 3XLBR8543 13 páginas. Two speed automatic washer
Também para Whirlpool 3XLBR8543: Manual de utilização e cuidados (35 páginas), Manual de instruções de instalação (11 páginas), Manual de utilização e cuidados (40 páginas)
Imprimir página
Load is wrinkled
•
Did you unload the washer promptly?.
Unload the washer as soon as it stops.
m
n
a
Did you use the right cycle for the load being washed?
Use the Synthetics/Permanent Press cycle or another cycle
with low spin speeds (if available) to reduce wrinkling.
Did you overload the washer?.
The wash load must be balanced and not overloaded. Loads
should move freely during washing.
Was the wash water warm enough to relax wrinkles, or
are you using warm rinses?
If safe for the load, use warm or hot wash water. Use cold
rinse water.
Are the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are connected
to the right faucets. See the installation Instructions.
Load is tangled or twisted
•
Did you overload the washer?.
The wash load must be balanced and not overloaded. Loads
should move freely during washing.
•
Did you wrap items around the agitator?
Drop items loosely into the washer. Do not wrap items around
the agitator.
Gray whites, dingy colors
•
Did you properly sort the load?
Dye transfer can occur when mixing whites and colors in a
load. Sort dark clothes from whites and lights.
•
Was the wash temperature
too low?.
Use hot or warm washes if safe for the load. Hot water should
be at least 111°F (44°C) to clean heavy or greasy soils.
Did you use enough detergent, or do you have hard
water?.
Use more detergent for washing heavy soils in cold or hard
water.
n
Are the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are connected
to the right faucets. See the installation Instructions.
Garment damage
Check the following:
Were sharp items removed from pockets before washing?
Empty pockets, zip zippers, snap or hook fasteners before
washing.
Were strings and sashes tied to prevent tangling?
Were items damaged before washing? Mend rips and broken
threads in seams before washing.
Did you overload the washer?
• The wash $oad must be balanced and not overloaded. Loads
should move freely during washing.
Did you properly add chlorine bleach?
Do not pour chlorine bleach directly on load. Wipe up bleach
spirts. Undiluted bleach will damage fabrics.
Did you follow the manufacturer's
care label instructions?
ASSISTANCE ORSERVICE
Before calling for assistance or service, please check
"Troubleshooting."
It may save you the cost of a service call. If
you still need help, contact the dealer from whom you pumhased
the washer, or a Whirlpool designated service company.
When calling, please know the purchase date and the complete
model and seriat number of your appliance. This information will
help us to better respond to your request.
If you need replacement
parts
If you need to order replacement parts, we recommend that you
only use FSP ® factory specified parts. These parts witl fit right
and work dght because they are made with the same precision
used to build every new WHIRLPOOL ® appliance.
To locate FSP replacement
parts in your area:
Contact the dealer from whom you purchased the washer, or a
Whirlpool designated service company.
12