Whirlpool 8MWTW1643 Manual de utilização e cuidados - Página 23
Procurar online ou descarregar pdf Manual de utilização e cuidados para Máquina de lavar roupa Whirlpool 8MWTW1643. Whirlpool 8MWTW1643 41 páginas.
Imprimir página
Lid Lock:
This LED indicates the lid is locked and cannot be opened.
If you need to open the lid, press Start/Pause. You may
open the lid whenever the LED "Lid Lock" is off.
Close the lid and press Start/Pause to continue the cycle.
5
Load Size
SMART LOAD® Models
For models with knob/button Load Size, the SMART
LOAD® system allows them to adjust accurately the load
size of dry clothes to be washed (S, M, L).
AUTO LEVEL® Models
For models with the "Auto" option in the Load Size, you
must select such option to access the AUTO LEVEL®
system which will determine the water level automatically.
Once the cycle starts, your washer's door will be blocked
and the AUTO LEVEL ® routine starts, which consists of
tub spins combined in pauses, for at least one minute.
When the routine finishes your washer's door will be
unlocked and it had determined the required level of
water. Then it starts the washing cycle.
Recommendations:
● Add dry cloth for an optimal detection.
● Do not add more clothes once the AUTO LEVEL® routine
finishes since the washer already selected the water level to
be used.
Manual Fill Models
For models with the "Manual Fill" option in the Load Size
knob, you must select this option to access the system for
manual filling, this allows to add the desired water
depending on the dry clothes load size you wish to wash.
Steps for manual filling:
1. Add the detergent and the clothes to wash.
2. Turn on the washer and select the desired cycle
options. Be sure to place the knob of Load Size in the
"Manual Fill" option.
AUTOMATIC
LOAD SIZE
3. Press the Start/Pause button. The Fill LED will flash
indicating that it is the time to fill with water.
4. Open your washer lid and fill with water to the optimal
level according you load. The LED indicator light for Fill will
stop flashing when reaching the minimum water level
predefined by the system and the Wash LED will still be
flashing.
NOTA: If your load is greater to the minimum water level
required by the system, continue filling with water until
covering the dry clothes, even if the Fill LED has stopped
flashing.
5. Close your washer's lid and press Start/Pause. (Wash
LED will stop flashing, then it will start agitation and the rest
of the washing steps).
6. In the Rinse Stage, Fill LED starts to flash, indicating that
it must fill again with water. Next, repeat from Step 4.
6
Temperatura
Select a washing temperature according to the kind of
clothes and dirt of what you are washing. To get better
results follow the labels instructions.
*Rinses are made with cold water.
Washing Temperature
Hot
In some cycles water from your boiler
is used. In other cases to save
energy and gentle care to clothes,
the hot water will be combined with
some cold water.
Warm/Semi-cold
Combination of cold and hot water
provided by the boiler.
Cold
This is the water temperature from
your faucet.
TEMPERATURA
Suggested Fabrics
White and pastels colors
clothes. Durable
garments. Heavily
soiled.
Vivid colors. Moderate
to light soils.
Dark colors that bleed
of fade.
Light dirt.
23