Whirlpool AWG 233 Manual de instruções de utilização - Página 30

Procurar online ou descarregar pdf Manual de instruções de utilização para Máquina de lavar roupa Whirlpool AWG 233. Whirlpool AWG 233 44 páginas.

MAINTENANCE AND CLEANING

•

Unplug your machine.

•

Close the water tap.

On the tap part of your machine's water inlet hose and at the extremities of

the water inlet valves, there are filters to prevent entrance of dirt and foreign

bodies into the water to the machine. If the machine is unable to receive

sufficient water although your water tap is opened, these filters should be

cleaned.

•

Remove the water inlet hose.

•

Remove the filters found on the water inlet valves by using tweezers

or pliers and wash thoroughly with a brush.

•

Clean the filters of the water inlet hoses located on the tap side by

removing manually, together with the seal.

•

After cleaning the filters, they can be refitted by reversing the removal procedure.

The pump filter system prolongs the life of your pump, which is used to drain

the dirty water. It prevents lint from entering the pump. Cleaning your pump

filter every 2-3 months is recommended. To clean your pump filter:

•

Remove the kickplate by pushing upwards with your hand from the

lower claws and pulling towards yourself.

•

Before opening the filter cover, place a cup in front of the filter cover

to prevent flow of the remaining water in the machine.

•

Loosen the filter cover by turning counter clockwise and drain the

water.

•

Remove the foreign bodies from the filter.

•

Check for the rotation of the pump manually.

•

After you have cleaned the pump, refit the filter cover by rotating

clockwise.

•

Refit the kickplate by holding from the claws and pushing it.

•

Do not forget that if the filter cover is not properly refitted, it will leak

water.