Whirlpool AWM 6100 Manual de serviço - Página 19

Procurar online ou descarregar pdf Manual de serviço para Máquina de lavar roupa Whirlpool AWM 6100. Whirlpool AWM 6100 22 páginas. Front load washing machine
Também para Whirlpool AWM 6100: Manual do utilizador (14 páginas)

Whirlpool AWM 6100 Manual de serviço
WHIRLPOOL CONSUMER SERVICES

TEST SEQUENCE

Step Advance to step
Pump Out
by pressing :
or Fill Via
(See Note 1)
:
1
Start
Pump out -
2
Advances
Prewash Cold fill, no
automatically
3
Prewash button
Main
wash
4
Easy iron button
Main
wash
5
Auto (or press
Main
rinse hold button)
wash
(Note 2)
6
Rinse hold button Fill via
fabric
softener
7
Rinse hold button Pump out -
8
Advances
Pump out -
automatically
(Note 3)
*Programme Sequence LED's: P = Prewash W = Wash R = Rinse RH = Rinse Hold D = Drain
Note 1 Unless indicated by "Advances automatically", the test cycle can only be advanced by
pressing the appropriate button once within five minutes, otherwise the machine will
pump out and a false fault will be indicated.
Note 2. This part of the test sequence can be terminated after the fill by pressing the "Rinse
hold" button but the NTC will not be checked for accuracy.
Note 3. This part of the test sequence can be terminated at any time by changing the cycle on
the cycle selector then reselecting drain and press the start button. Once the machine
is empty of water, the start button may be pressed and held until the start button light
goes off to reset the timer ready for the next wash.
If a failure is detected during the test sequence the timer will :
1.
Initiate the safety step routine :
A. Drain pump runs until pressure switch resets plus 30 seconds.
I.
Main motor is turned off.
II.
Water inlet valves are turned off.
III.
Element is turned off
2.
Stop the machine and illuminate the speed indicator LED's in a pattern to indicate the
fault code.
Temperature Time
-
60 s (fill)
heat
Warm fill, no
60 s (fill)
heat
Warm fill,
60 s (fill)
heat to 90°C
25 min
heat
Cold fill, no
55 s (fill)
heat
Cold fill, no
60 s
heat
6 min
Drum
Component(s)
Rhythm
Checked
Stationary Rinse hold and
Intensive rinse
buttons
Stationary Prewash button
and prewash fill
Stationary Main wash fill
10 s on,
Heating circuit,
6 s off
NTC, leakage
80 s on,
Easy ironing
2 s off
button
80s on,
Fabric softener fill
2s off
10s on,
Pump
6s off
Spin Max
Pump, spin
speed
Model AWM6100
Page 19 of 22
LED *
P
W
R
RH
D