Whirlpool 22' TO 25' NO-FROST DESIGNERSTYLE TOP FREEZER REFRIGERATOR WITH THIRSTCRUSHERDISPENSING SYSTEM Manual de utilização e cuidados - Página 12

Procurar online ou descarregar pdf Manual de utilização e cuidados para Frigorífico Whirlpool 22' TO 25' NO-FROST DESIGNERSTYLE TOP FREEZER REFRIGERATOR WITH THIRSTCRUSHERDISPENSING SYSTEM. Whirlpool 22' TO 25' NO-FROST DESIGNERSTYLE TOP FREEZER REFRIGERATOR WITH THIRSTCRUSHERDISPENSING SYSTEM 26 páginas. 22’ to 25’ no-frost designerstyle top freezer refrigerator with thirstcrusher dispensing system

Imprimir página

Removing

the crispers

and crisper

cover

To remove the crispers:

Slide crisper straight out to the stop.

2. Lift the front and slide out the rest of the way.

3. Replace in reverse order.

To remove the cover:

Push up the glass insert from the bottom, then slide

out with both hands.

2. Lift front of cover frame.

3. Lift cover frame up and out.

To replace the cover:

Fit back of cover frame into notch supports on back

wall of refrigerator, then lower the front into place.

2. Make sure the front cover metal support is in the

notches in the sides of the liner.

NOTE:

If the support is not positioned properly, the

doors may not close all the way.

3. Slide back of glass insert into place, then lower front.

Pull out to the stop, lltt

the front, and pull again.

Remove the glass insert.

Lift the cover front, then

the back.

NOTE: Glass Insert Is

heavy. Handle It carefully.

Adjusting

the crisper

humidity

control

You can control the amount of humidity in the

moisture-sealed crispers. Adjust the control to any

setting between LOW and HIGH.

LOW (open) lets moist air out of the crisper for best

storage of fruits and vegetables with skins.

HIGH (closed) keeps moist air in the crisper for best

storage of fresh, leafy vegetables.

Humidity Control

HlCH.*.~*LOW

Removing

the freezer

shelf

To remove the shelf:

Lift right side of shelf off supports.

2. Slide shelf out of shelf support holes,

3. Replace in reverse order.