Whirlpool 3VETlSDK Manual de utilização e cuidados - Página 13

Procurar online ou descarregar pdf Manual de utilização e cuidados para Frigorífico Whirlpool 3VETlSDK. Whirlpool 3VETlSDK 22 páginas. No-frost refrigerator-freezer
Também para Whirlpool 3VETlSDK: Manual de utilização e cuidados (20 páginas)

Imprimir página

Changing

the light

bulbs

Electrical

Shock Hazard

Before removing a light bulb, either

unplug the refrigerator or disconnect the

electricity leading to the refrigerator at

the main power supply.

Failure to do so could result in electrical

1 shock or personal injury.

To change the refrigerator

light:

Disconnect refrigerator from power supply.

2. Reach behind the Control Panel to remove

bulb.

3. Replace with a 40-watt appliance bulb.

4. Reconnect refrigerator to power supply.

To change freezer light (on some models):

1. Disconnect refrigerator from power supply.

2. Grasp the top and bottom of the light

shield.

3. Squeeze and pull light shield out.

4. Replace with a 25-watt appliance bulb.

5. Snap light shield into place.

6. Reconnect refrigerator to power supply.

NOTE: Not all commercial appliance bulbs will

fit your refrigerator. Be sure to replace a bulb

with one of the same size and shape.

Removing

the base grille

To remove the grille:

Condenser

coils

Open refrigerator door.

2. Pull base grille forward to release the

support tabs from the metal clips.

3. Do not remove Tech Sheet fastened

behind the grille.

To replace the grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.

3. Close refrigerator door.

See cleaning instructions for defrost pan and

condenser coils on page 16.