Whirlpool 4322658A Manual - Página 18

Procurar online ou descarregar pdf Manual para Frigorífico Whirlpool 4322658A. Whirlpool 4322658A 48 páginas. In-door ice system

c) Install a length of flexible tubing on the

spout of the squeeze bottle.

d) Insert the end of the flexible tubing into

the water fill nozzle as far as ice block-

age.

e) Squeeze the bottle and allow the hot

water to melt all of the ice.

Squeeze

Bottle

To reinstall the new tube:

a) Insert the end of the tube into the hole

of the freezer liner fitting, and push it

through as far as the nozzle will allow.

To prevent a water flow restriction, do

not twist the tube and nozzle assembly.

Pull the end of the tube at the rear of

the unit to take up any slack. NOTE: The

end of the tube may get caught on the

fitting at the back of the unit. If this hap-

pens, position the tube in the center of

the hole with a small screwdriver, and

push the tube the rest of the way

through from the front.

Fitting

Rear of Unit

Insert Flexible Tube

Into End Of Nozzle

Pull Tube

Out Here

4-4

b) Position the water fill nozzle so that the

bend is toward the mullion, and insert

the inner half of the grooved shoulder

into the square cutout of the liner.

Grooved Shoulder In Liner Cutout

c) Push the end of the tube into the water

line fitting as far as it will go, and then

pull on the tube to make sure that it is

secure.

Push Tube Into Fitting

Locking Ring

Water Line

Fitting

Rear of Unit

Water Nozzle