AEP transducers ForceKAL Manual Operativo - Página 3

Procurar online ou descarregar pdf Manual Operativo para Instrumentos de medição AEP transducers ForceKAL. AEP transducers ForceKAL 13 páginas.

41126 Cognento (MODENA) Italy

Via Bottego 33/A

Tel: +39-(0)59 346441

Internet: http://www.aep.it

Fax: +39-(0)59-346437

INTRODUCTION

The program is designed to perform the calibration of material testing equipment, machines

force

samples,

test

benches

other

equipment

using

standard

devices.

Evaluation of the uncertainty of calibration is performed according to the requirements of the

UNI CEI ENV 13005 and the information given in Appendix D of ISO / DIS 7500-1.

To perform the calibration is necessary to generate a significant number of measures (5, 8 or

10) of increasing strength in two or three series to check the repeatability of the machine

calibration.

After each cycle, increasingly, the machine must be reset to zero before performing the next

measurement cycle.

After the test, the program calculates:

a) Average readings

b) Error reading%

c)% expanded uncertainty associated with each point of measurement.

All certificates are then printed and stored in a database that keeps the historian of

calibrations performed.

The program maintains a database of standard AEP instruments type TA2USB , TAUSB,

MP10, DFI MP2E, MP2000A STAR, MP10Plus and MP6A connected to a PC via RS232

serial communication or USB to ensure the acquisition of instantaneous force measurement.

For each standard instrument is necessary to introduce all the identification data, SIT

certificates or equivalent

reference and for the different calibration points the computed

uncertainties.

The program automatically advices the operator if the used reference instrument has a

certificate date expired.

_______________________________________________________________________________

Pag. 3