Acom JW-1 Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Balanças Acom JW-1. Acom JW-1 16 páginas. Top loading balance
Também para Acom JW-1: Manual do Proprietário (3 páginas)

Imprimir página

Percentage Sampling Specifications

Minimum 100% Weight

Minimum Percentage

Maximum Percentage

NOTE:

Once a successful sample has been accepted by the

balance, the Piece Weight and the Percentage will continue to be used

until it is reset by another successful sample. This is true even if you

turn the scale off or unplug it.

Settings Mode

There are 4 parameters that can be set depending upon the balance's

application. These are designated as User Parameters (UP) 1 thru 4.

The listed values are the default values. See the chart below for a

detailed explanation f each of the User Parameters.

Entering Settings Mode

1. Make sure that the balance is turned OFF

2. Press and hold down the

3. Turn the scale ON

4. Once the display reads UP-

5. Press the

6. The display should read UP-1 0 where the 1 signifies the User

Parameter and the 0 is the value that it is currently set at

7. Use the SET key to toggle the value to its desired setting

8. Press the

Parameter

9. The display should read UP-2 0

10. Use the SET key to toggle the value to its desired setting

11. Press the

Parameter

12. The display should read UP-3 0

13. Use the SET key to toggle the value to its desired setting

14. Press the

Parameter

15. The display should read UP-4 0

300g

1 g

key

key to store the value and move on to the next User

JW-1

600 g

1500 g

2 g

5 g

0.01%

30,000.0 %

release the

key

3000g

10 g