Clairtone R1W001BCDC Manual do Proprietário - Página 7
Procurar online ou descarregar pdf Manual do Proprietário para Refrigerador de vinho Clairtone R1W001BCDC. Clairtone R1W001BCDC 16 páginas. 18-bottle dual temperature zone wine cooler

If your wine cooler fails to operate properly, please follow these procedures prior to contacting Customer Service.
Problem
Probable Cause
Wine cooler is not
- The appliance is not plugged in.
cooling
- Breaker fuse has tripped.
- Outlet is not working.
Temperature inside
- The wine cooler is placed too close
is not cold enough
- Lack of air circulation for the fans
- Dust has accumulated at the back,
- The door is not closed tightly or is
Wine cooler is
- A bottle of wine has spilled or is
emitting unpleasant
smell
Interior light is
- This indicates Auto Cycling is in
flashing
There is water
- There is too much humidity.
forming in the wine
- The temperature inside the wine
cooler
cooler is considerably lower than
the surrounding temperature of the
environment, creating excess
condensation.
If the problem still persists, refer to the warranty or visit www.super-electric.com. For service, call 1-800-268-7622.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE APPLIANCE YOURSELF. DOING SO COULD VOID THE
WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.
TROUBLESHOOTING
to a heat source.
at the back.
creating lack of air circulation.
being opened too frequently or for
extended periods.
leaking.
effect, indicating it has reached a
temperature that was set earlier.
Solution
- Be sure to plug into a 120V AC, 60Hz outlet.
- Please check your electrical box to confirm the
breaker has not been blown. Ensure unit is OFF.
Plug in and attempt to turn on again.
- Attempt to plug unit into another receptacle in the
house.
- Relocate the wine cooler to avoid direct sunlight or
other heat sources.
- Position the wine cooler so that there is enough
space between the back of the unit and the wall by
following procedures listed under "Installation
Instructions".
- Using a crevice tool attachment, pass vacuum over
the back fan cover to remove dust built-up.
- Ensure door is closed properly and do not open
door unless necessary. Do not leave door open for
long periods of time.
- Locate the leaking bottle and remove it from the
wine cooler. Wipe away spills with a damp cloth
and mild detergent. Allow inside to air dry.
- Adjust temperature of wine cooler to a lower
temperature setting. This is a normal function and
does not require repair.
- Unplug wine cooler from outlet to stop power
supply and absorb accumulated water with paper
towels or a sponge.