Backyard Creations 272-4293 Manual de instruções de montagem - Página 13
Procurar online ou descarregar pdf Manual de instruções de montagem para Mobiliário de interior Backyard Creations 272-4293. Backyard Creations 272-4293 14 páginas. Galloway bar top & base
Imprimir página
2. Push in the igniter button. You will hear a slight clicking sound. With the igniter button
pushed in, push and turn the control knob to the "ON" position. The fire should light
within a few seconds. Once the flame is lit, release the igniter button and continue to hold
the control knob in for 10 to 15 seconds. Release the control knob. The control knob
should pop back out and then the fire remain lit. Note: If the fire does not light, turn the
knob to the "OFF" position and wait five (5) minutes before trying again.
3. To turn down the flame, push the control knob in slightly and turn to Medium (medium
flame), or Low (small flame).
4. To shut down the fire pit, turn the control knob to the "OFF" position and turn off the
tank valve.
PROBLEM
Burner won't light
Burner won't stay
lit after lighting
TROUBLESHOOTING GUIDE
CAUSE
No propane gas at burner
No spark at electrode
Lack of oxygen
Thermocouple not in flame
Thermocouple connection
at the main control valve is
loose
No glass beads on burner
REMEDY
Check that gas tank valve is open.
Turn control knob to "ON" and push
control knob in. Make sure tank has
propane gas.
Check that AA battery is installed
with negative (-) end first and has a
charge. Check that the wire is
connected to the ignition module.
Check that the electrode is not
cracked or broken.
Remove excess glass beads from
around the ignition well.
Check that the tip of the
thermocouple is even with the top of
the ignition well. Remove any glass
beads from the ignition well.
Tighten the thermocouple nut at the
back of the valve.
Cover the burner with glass beads
per the instructions.
13