Whirlpool WRT779REYW01 Instruções para o utilizador - Página 5

Procurar online ou descarregar pdf Instruções para o utilizador para Frigorífico Whirlpool WRT779REYW01. Whirlpool WRT779REYW01 45 páginas.

Whirlpool WRT779REYW01 Instruções para o utilizador
NOTE: Tighten t henutbyhand. Then tighten i twithawrench
twomore turns. Donotovertighten.
Complete theInstallation
A
B
C
D
E
F
G
4=
5.
A. Refrigerator
water tubing
E. Ferrule (purchased)
B. Nut (provided)
F Nut (purchased)
C. Bulb
G. Household
water line
D. Coupling (provided)
Turn shutoff
valve ON.
Check
for leaks. Tighten
any nuts or connections
(including
connections
at the valve) that leak.
Style 3
1. Unplug refrigerator or disconnect power.
2. Remove and discard the black nylon plug from the gray water
tube on the rear of the refrigerator.
3. Thread the provided nut onto the water valve as shown.
NOTE: Tighten the nut by hand. Then tighten it with a wrench
two more turns. Do not overtighten.
A
I/
III
B
4=
5.
A. Bulb
B. Nut (provided)
Turn shutoff valve ON.
Check for leaks. Tighten any nuts or connections (including
connections at the valve) that leak.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
1. Plug into a grounded 3 prong outlet.
2. Flush the water system. See "Water Dispenser."
NOTE: Allow 24 hours to produce the first batch of ice. Discard
the first three batches of ice produced. Allow 3 days to completely
fill ice container.
TOOLS NEEDED: _e" hex head socket wrench, Torx ®tT27
screwdriver, #2 Phillips screwdriver, flat-blade screwdriver, 5/le"
open-end wrench, flat 2" putty knife.
IMPORTANT:
Before you begin, turn the refrigerator control OFF, unplug
refrigerator or disconnect power. Remove food and any
adjustable door or utility bins from doors.
Depending on your model, you have either Style 1 - interior
controls and water dispenser or Style 2 - exterior controls and
water dispenser. Follow the instructions and graphics specific
to your model.
All graphics referenced in the following instructions
are
included later in this section after "Final Steps."
Style I - Remove Doors and Hinges
1=
2.
_"
Hex Head
Hinge
Screw
12-24 Torx _ Head Screw
Unplug refrigerator or disconnect power.
Open the refrigerator door and remove the base grille from the
bottom front of the refrigerator. See Base Grille graphic.
1-®TORX is a registered trademark
of Saturn Fasteners, Inc.