Clam Switchback 9129 Instruções de configuração - Página 3

Procurar online ou descarregar pdf Instruções de configuração para Tenda Clam Switchback 9129. Clam Switchback 9129 9 páginas.

SET-UP INSTRUCTIONS

2. Open the shelter so that the gray top is facing upward.

Lay the shelter as flat on the ice as you can, making sure

that the tent is not twisted or overlapping any of the poles

(Photo 2). Do NOT force the shelter while unfolding.

3. Stand on the skirt of the long side of the shelter,

grasp the red loop sewn onto the eyelet in the center of

the roof with one hand, and place your other hand on

the opposite side at the roof line. Pull upward on the

Photo 2

loop while pushing on the roof line until the roof section

pops up. (Photo 3).

NOTE: The red looped hub (roof) gets deployed FIRST

on set-up and collapsed LAST on take-down.

4. Once the roof is popped up, go to one of the short (6

foot) sides of the shelter. Step on the skirt, feet wide

(Photo 4), grab the top corners on both sides and pull

straight up (Photo 5 & 6). Once the wall is up, grasp the

loop sewn onto the eyelet in the center of the short side

wall and pull outward until the wall pops up (Photo 7).

Repeat this procedure for all the walls, going around the

shelter either clockwise or counter-clockwise (Photo 8).

Photo 3

Photo 5

Photo 4

Photo 6

Photo 7

Photo 9

Photo 8

Page 3