Clam Switchback 9129 Instruções de configuração - Página 7

Procurar online ou descarregar pdf Instruções de configuração para Tenda Clam Switchback 9129. Clam Switchback 9129 9 páginas.

TAKE-DOWN INSTRUCTIONS

1. Close all windows. Leave one or both doors open to allow

air to escape.

2. Remove all ropes and ice anchors and store them in the

provided pouch or in the carry bag side pocket. In windy

conditions, remove ice anchors after collapsing the roof and

walls.

3. Step on the skirt of the short (6 foot) side. Push the center

hub until the wall collapses inward (Photo 20). Continue

either clockwise or counter-clockwise pushing each wall

inward until all the walls are collapsed (Photo 21). The

shelter will fall to the ice on its own.

4. Push the hub of the roof (red loop) down until it collapses

(Photo 22).

NOTE: The red looped hub (roof) gets deployed FIRST on

set-up and collapsed LAST on take-down.

Make sure the roof collapses all the way. You may have to

pull up on the edge of the roof to get the roof hub to

collapse.

5. Fold up the shelter (Photo 23).

6. When folding the shelter up for storage, inspect the hub

systems and poles for entanglement.

NOTE: It is extremely important to ensure the hub

systems and poles are not tangled before completely

folding the tent up for storage (Photo 24).

7. Once the hub systems are all free and the tent is completely

folded, store in carry bag. Place the folded shelter and the ice

anchor/rope pouch back into the carrying case with the hubs

toward the bottom end of the bag.

Make sure your ice shelter is completely dried out after

each use and before storing. Store your ice shelter in a

cool, dry place. Keep away from rodents.

Tangled

Page 7

TAKE-DOWN INSTRUCTIONS

Photo 24

Photo 20

Photo 21

Photo 22

Photo 23

Untangled