AEQ Phoenix Mobile Nota de aplicação - Página 4

Procurar online ou descarregar pdf Nota de aplicação para Equipamento de gravação AEQ Phoenix Mobile. AEQ Phoenix Mobile 8 páginas. Audio codec system
Também para AEQ Phoenix Mobile: Nota de aplicação (8 páginas)

Imprimir página

3. OTHER POINTS TO CHECK

We are now going to quickly overview the rest of configuration menus where it is

recommended to check that every parameter is correctly configured.

Coding Algorithm

At the Wizard menu Sel.Codec should be G722, for a start, although you can

change this at a later stage for better quality. In order to change the coding

algorithm by another pre-selected one, just select the Sel.codec line, press

Select and select one within the new window shown. In order to choose the

particular coding modes in each list shown in the Sel.codec menu, go to Menu

ADVANCED

The audio routing will be most likely correct by default to send Mic 1 audio to

the transmission and send the received stream to HP1 headphone output. You

can, however, make sure of this from Menu

Select.

Configure the rest of parameters after reading the manual according to your particular

needs.

PROXY SIP Configuration

You can make sure that this is correct from the main screen: Menu

ADVANCED

Check that User Name is filled with a user identifier that is previously registered

at the AEQ SIP server (for example: phoenix_123).

STUN Protocol

2 Activate ON

This is important and recommended, as it will ease connecting to other

equipment that is behind a router in a local network.

3 Server: At the moment of writing this document, the following STUN server is

recommended: "stun.voxgratia,org" (IP=83.103.82.85)

If the DNS Server field in the communications menu hasn't been configured,

you must substitute the STUN name by its IP.

4 Port : 3478

Press "back" key in order to go to 3. SIP config

1 Activate ON

2 Address: sip.aeq.es.

APLICACIONES ELECTRONICAS QUASAR S.A.

TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:

6. Link profiles

Select

5. Communications

Options.

ADVANCED

3. SIP config

1. Paramteters:

2. Proxy and check:

www.aeq.eu

3. Audio Settings