Whirlpool WGD97HEXW Manual de utilização e cuidados - Página 8
Procurar online ou descarregar pdf Manual de utilização e cuidados para Secador Whirlpool WGD97HEXW. Whirlpool WGD97HEXW 36 páginas. Electronic dryer
Também para Whirlpool WGD97HEXW: Manual de instruções (8 páginas)
![Whirlpool WGD97HEXW Manual de utilização e cuidados](/uploads/products/server2/6833942/6833942.jpg)
CYCLE GUIDE — MANUAL CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Adjusting drying time on Manual Cycles
When you select a Manual Cycle, the default time appears in
the display. Use the LCD controls to increase or decrease the
time in 1 minute increments. Press and hold to change the
time in 5 minute increments.
The maximum dry time is 100 minutes.
Cycle:
Items to dry:
Small loads and
Quick Dry
sportswear
Any load
Timed Dry
NOTE: Select Air
Only to dry foam,
rubber, plastic, or
heat-sensitive
fabrics.
† Wrinkle Shield
with Steam option is available only with High, Medium-High, and Medium Drying Temperature settings.
™
CYCLE GUIDE — STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, remove odors, and refresh fabrics.
Items to
Cycle:
refresh:
Shirts, blouses,
Quick Refresh
and slacks
with Steam
Mixed Loads
Enhanced
Touch Up
† Wrinkle Shield
with Steam option is available only with High, Medium-High, and Medium Drying Temperature settings.
™
8
Drying
Default
Temperature:
Time:
13
High
Medium-High
Medium
Low
Extra Low
Air Only
High
40
Medium-High
Medium
Low
Extra Low
Air Only
Drying
Default
Temperature:
Time:
Medium-High
12
High
22
Medium-High
Medium
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Available
Options:
Wrinkle Shield
†
For small loads of 3-4 items.
Wrinkle Shield
Use to dry items to a damp level for items that do
†
not require an entire drying cycle, or to finish drying
slightly damp items. Select a drying temperature
based on the type of fabrics in your load. If you are
unsure of the temperature to select for a load,
select the lower setting rather than the higher setting.
Available
Options:
Wrinkle Shield
Use to remove odors and reduce light wrinkles.
†
Static Reduce
Select the number of garment to be refreshed
(on some models). Do not add dryer sheets.
Wrinkle Shield
Use to remove wrinkles, including from loads left in
†
Static Reduce
the dryer too long. Dry time will automatically adjust
when the load size is sensed. Cycle run time cannot
be manually adjusted, but Temperature is selectable.
Do not add dryer sheets
Cycle Details:
Cycle Details: