Whirlpool 3LWED4900YW Manual - Página 21

Procurar online ou descarregar pdf Manual para Secador Whirlpool 3LWED4900YW. Whirlpool 3LWED4900YW 30 páginas.

Imprimir página

SPECIFICATIONS

These units are sold in multiple regions with different

requirements for measuring capacity. Below are a few

of the valid forms of measure posted on this product:

Dry Linen Capacity: A weight measure that re ects a maximum

load size that can be loaded into the dryer.

IEC Capacity: The capacity measure that represents the

maximum capacity of dry linens and textiles which the

manufacturer declares can be treated in a speci c cycle.

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Good air ow

Along with heat, dryers require good air ow to ef ciently

dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See Installation

Instructions.

The venting system attached to the dryer plays a big role

in good air ow.

Service calls caused by improper venting are not covered

by the warranty and will be paid by the customer, regardless

of who installed the dryer.

Use Automatic Dry Cycles for Better Fabric Care and Energy Savings

Use the Automatic Dry Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Dry

Cycles, drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the

dryer shuts off when the load reaches the selected dryness. The dryer will default to Energy Preferred cycle to give you optimal

dryness for your load and save energy.

With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.

Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.

Dry Linen Capacity

15 kg (33 lb)

IEC Capacity

9,0 kg (19,8 lb)

Sound Level:

Lpa < 70 dB(A) (Kpa: +/- 2,5 dB(A))

Maintain good air ow by:

Cleaning your lint screen before each load.

Replace plastic or foil vent material with 102 mm (4")

diameter heavy, rigid vent material.

Use the shortest length of vent possible.

Use no more than four 90° elbows in a vent system;

each bend and curve reduces air ow.

Good

Remove lint and debris from the exhaust hood.

Remove lint from the entire length of the vent system at

least every 2 years. When cleaning is complete, be sure

to follow the Installation Instructions supplied with your

dryer for nal product check.

Clear away items from the front the dryer.

102 mm

(4")

Better