Whirlpool 4KAED4900 Manual de utilização e cuidados - Página 9

Procurar online ou descarregar pdf Manual de utilização e cuidados para Secador Whirlpool 4KAED4900. Whirlpool 4KAED4900 36 páginas.

Imprimir página

DRYER CARE

Explosion Hazard

Keep flammable

materials

and vapors, such as

gasoline, away from dryer.

Piace dryer at least 460 mm (18 inches) above the floor

for a garage installation.

Failure to do so can result in death, explosion,

or fire.

Cleaning the dryer interior

To clean dryer drum

1. Apply a liquid, nonflammable

household cleaner to the

stained area of the drum and rub with a soft cloth until

stain is removed.

2. Wipe drum thoroughly

with a damp cloth.

3. Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments that contain loose dyes, such as denim

blue jeans or brightly colored cotton items, may discolor the

dryer interior. These stains are not harmful to your dryer and

will not stain future loads of clothes. Dry these items inside

out to avoid drum staining.

Removing

accumulated

lint

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often,

depending

on dryer usage. Cleaning should be done

by a qualified servicer.

From the Exhaust Vent

Lint should be removed every 2 years, or more often,

depending

on dryer usage.

Cleaning the lint screen

Every load cleaning

The lint screen is located in the door opening of the dryer.

A screen blocked by lint can increase drying time.

To clean:

1. Pull the lint screen straight up. Roll lint off the screen

with your fingers. Do not rinse or wash screen to

remove lint.

2. Push the lint screen firmly back into place.

IMPORTANT:

[]

Do not run the dryer with the lint screen loose,

damaged, blocked, or missing. Doing so can cause

overheating and damage to both the dryer and fabrics.

[]

If lint falls off the screen into the dryer during removal,

check the exhaust hood and remove the lint. See

"Venting Requirements."

As needed cleaning

Laundry detergent and fabric softener residue can build

up on the lint screen. This buildup can cause longer drying

times for your clothes, or cause the dryer to stop before

your load is completely dry. The screen is probably clogged

if lint falls off while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months,

or more frequently, if it becomes clogged due to a residue

buildup.

To wash:

1. Roll lint off the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent.

Scrub lint screen with the brush to remove residue

buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel.

Reinstall screen in dryer.