Whirlpool 4KWED4900 Manual de utilização e cuidados - Página 4
Procurar online ou descarregar pdf Manual de utilização e cuidados para Secador Whirlpool 4KWED4900. Whirlpool 4KWED4900 35 páginas.
Imprimir páginaCHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW
Fire Hazard
Use a heavy metal vent,
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions
can result in death
or fire.
Good Air Flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying times
and improve your energy savings. See Installation
Instructions.
The venting system attached to the dryer plays a big role in
good air flow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
Maintain good air flow by:
[]
Cleaning your lint screen before each load.
[]
Replace plastic or foil vent material with 102 mm (4")
diameter heavy, rigid vent material.
102 mm
(4")
[]
[]
Use the shortest length of vent possible.
Use no more than four 90 ° elbows in a vent system;
each bend and curve reduces air flow.
Good
Better
[]
[]
[]
Remove lint and debris from the exhaust hood.
Remove lint from the entire length of the vent system at
least every 2 years. When cleaning is complete, be sure
to follow the Installation Instructions supplied with your
dryer for final product check.
Clear away items from the front of the dryer.
_Jse Automatic
cycles for Better Fabric Care and Energy Savings
Use the Automatic Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic
Cycles,
drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer
shuts off when the load reaches the selected dryness. The dryer will default to Normal Dryness Level to give you optimal dryness
for your load and save energy.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to overdrying.
Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
4