Whirlpool 7MWGD1750EQ Manual de utilização e cuidados - Página 21
Procurar online ou descarregar pdf Manual de utilização e cuidados para Secador Whirlpool 7MWGD1750EQ. Whirlpool 7MWGD1750EQ 27 páginas. Electric or gas dryer
Imprimir página
3.
Select the desired cycle
Select the desired cycle for your load. See the "Cycle Guide" for
more information about each cycle.
AUTOMATIC CYCLES (CICLOS AUTOMÁTICOS)
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting Jeans or Muy Seco (Very Dry) or Delicado (Delicate)
or Menos Seco (Less Dry) automatically adjusts the dryness
level at which the dryer will shut off. Once a dry level is set, it
cannot be changed without stopping the cycle.
Automatic Cycles (Ciclos Automáticos) give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting.
NOTE: Jeans or Muy Seco (Very Dry) removes more load
moisture.
4.
Set cycle settings
Select cycle settings by turning the knob to the desired
position.
NOTE: Not all options and settings are available with all cycles.
Temperature (Temperatura)
Turn Temperature knob to change the drying temperature
setting. See "Setting Drying Temperature".
Wrinkle Prevention (Prevención de Arrugas) feature (on
some models)
Get 90 minutes of heat-free, periodic tumbling at the end of
n
a cycle. Turn the Wrinkle Prevention knob to select Yes or No
at any time before the cycle has ended.
On some models with a Wrinkle Prevention, cycle will
n
automatically get 40 minutes of heat-free, periodic tumbling
at the end of a cycle.
Yes
No
Prevención de Arrugas
Wrinkle Prevention
5.
Select Cycle Signal (Alarma
Fin de Ciclo) if desired
Turn the Cycle Signal knob to select the desired setting (Yes or
No). The Cycle Signal alarm produces an audible sound when the
drying cycle is fnished. Promptly removing clothes at the end of
the cycle reduces wrinkling.
NOTE: When the Wrinkle Prevention setting is selected and the
Cycle Signal is On, the tone will sound every 5 minutes until
the clothes are removed, or the setting remaining time ends.
6.
Press Cycle Signal (Alarma Fin de
Ciclo) to begin cycle
Push and hold the Cycle Signal knob to begin the cycle.
Promptly remove garments after cycle has completed to reduce
wrinkling. Use the Wrinkle Prevention feature to avoid wrinkling
when you are unable to remove a load from the dryer as soon
as it stops.
21