Whirlpool AWZ 7913 WP Manual de referência rápida - Página 4
Procurar online ou descarregar pdf Manual de referência rápida para Secador Whirlpool AWZ 7913 WP. Whirlpool AWZ 7913 WP 4 páginas. 6kg-load 6th sense condenser tumble dryer, awz 7913 awz 7913 wp
Também para Whirlpool AWZ 7913 WP: Manual de instruções de utilização (9 páginas)
Imprimir página
Before using the machine, please also read the instructions for use carefully!
AWZ 7913
Programme selector knob
The drying programme is selected by turning
this knob.
"Start (Pause)" button
The drying programme is started by pressing
this button. The indicator lamp flashes during
the selection phase and lights up during drying.
Indicator lamps
Filter
The indicator lamp lights up when the filter
and/or heat exchanger need cleaning.
Clean the filter at the end of every cycle.
Water container
The indicator lamp lights up when the water
container needs to be emptied. The drying
cycle is automatically interrupted. Empty the
container and restart the drying programme.
Empty the water container after every
drying cycle.
Clean heat exchanger
The Led lights up after 30 cycles when the
heat exchanger needs to be cleaned. Clean
the heat exchanger. Then for reset the led
indication, turn the programme selector
knob to the vertical position indicated by the
symbol "
(Pause)" button during 3 seconds until led
switches off.
Overdry protection
The indicator lamp lights up when a humidity
controlled program is selected, to indicate the
working protection function. Function is not
active in time controlled programmes 20', 30',
40', 60', 90' and "
Whirlpool is a registered trademark of Whirlpool USA
Quick Reference Guide
" and press the "Start
".
Programme sequence
Overdry
Drying
protection
Options
Gentle
Reduces drying intensity (recommended for
delicate items).
Buzzer
Signals/sounds end of drying cycle.
Delayed Start
Delays the start of the drying cycle by 3 to 9
hours.
Press the start delay button and selection
appears on the programme sequence. Then
press the "Start (Pause)" button to confirm
the final selection and to start the dryer.
During start delay phase, the time selected
led is blinking. During countdown, the
remaining time is indicated. To cancel the
previously set time delay, set the the
programme selection knob to "
press the start delay button to make the 3
lights off.
(Subject to technical modifications)
GB
+
Anti-
End of
crease
cycle
" or
5019 307 00816
4