Whirlpool Cabrio WGD8000D Manual do operador - Página 17
Procurar online ou descarregar pdf Manual do operador para Secador Whirlpool Cabrio WGD8000D. Whirlpool Cabrio WGD8000D 30 páginas. Smart electronic dryer
Imprimir página
4.
Select type of load to dry
First select a cycle from the "What to Dry" (Automatic cycles) and
then select the "How to Dry" to get the best combination cycle
available for the type of items you are going to dry. See "Cycle
Guide" for cycle details. Not all cycles are available on all models.
Automatic Cycles:
You can select a different dryness level, depending on your
load. Touch DRYNESS to scroll to Less to More. Selecting
Less to More automatically adjusts the dryness level at which
the dryer will shut off. Dryness level can be changed in the first
5-8 minutes of the cycle.
Automatic Cycles give the best drying in the shortest time. Drying
time varies based on fabric type, load size, and dryness setting.
NOTE: Automatic Cycles will give you up to 3 temperatures to
adjust and it varies, depending on the "What to Dry" or "How
to Dry" selections that have been made.
TIMED DRY Cycle:
When you select Timed Dry, the default time appears in the
display. Touch "+" and "–" to increase or decrease the time in
1 minute increments. Touch and hold to change the time in 5
minute increments.
The default temperature may be changed by pressing
Temperature until the desired dry temperature is lit.
Steam Refresh Cycles:
If you will be unable to remove a load immediately, touch
FINISHING TOUCH twice to select Wrinkle Shield™, to add
up to 150 minutes of periodic tumbling.
5.
Adjust cycle modifiers, if desired
You may adjust different settings,
depending on what you are drying and
how you are going to dry the item. See the
"Cycle Guide" for detailed information.
NOTE: Not all options and modifiers are
available with all cycles.
6.
Select any additional options
Add additional options such as Static Reduce, Wrinkle
Shield™, and/or EcoBoost™ by touching that option. If you
will be unable to remove the load promptly, select Wrinkle
Shield™ before touching START/PAUSE.
NOTE: Not all options and settings are available with all cycles.
7.
Touch and hold START/PAUSE to begin the cycle.
8.
Promptly remove garments after cycle has completed
to reduce wrinkling.
Changing the Automatic Cycle settings
to increase or decrease drying time
If all your loads on all Automatic Cycles are consistently less
dry or more dry than you would like, you may change the
default settings to increase or decrease the default dryness
level.
Your automatic drying settings can be adjusted to adapt to
different installations, environmental conditions, or personal
preference. This change is retained and will affect all of your
Automatic Cycles, not just the current cycle/load. There are
5 drying settings, which are displayed using the time display:
u
q
To change the drying settings:
NOTE: The settings cannot be changed while the dryer
is running or paused. The dryer must be in standby mode
(power is off) to adjust the default settings.
1. Before starting a cycle, touch and hold DRYNESS
u
q
2. Touch DRYNESS to select the dryness level shown in
3. Touch and hold START/PAUSE to save the new dryness
Touch and hold START/PAUSE
to begin cycle
Remove garments promptly
after cycle is finished
0 Much wetter clothes, 30% less drying time.
1 Slightly wetter clothes, 15% less drying time.
2 Factory preset dryness level.
3 Slightly drier clothes, 15% more drying time.
4 Much drier clothes, 30% more drying time.
for 6 seconds.
the time display: 0, 1, 2, 3, or 4.
level setting.
15