CalAmp 520004-1 Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para Transcetor CalAmp 520004-1. CalAmp 520004-1 9 páginas.

GENERAL INSTALLATION

INSTRUCTIONS FOR TRANSCEIVER

NOTE to System Operator:

California Amplifier family of Transceiver products has been designed for

installation by a licensed or qualified installer with experience in installing

wireless antennas.

NOTE to INSTALLER:

1. Installation and operation of this family of Transceiver products require full

compliance with FCC-adopted radio frequency exposure limits. It is in the

responsibility of the installer to install these devices and their associated

antennas so that RF exposure does not exceed 1.0mW/cm

table summarizes the minimum distance required to satisfy these

requirements.

P/N

Integrated Planar (17 dBi)

520005-1

520004-1

520006-1

520007-2

520024-2

520004-2

520006-2

2. When installing a standalone Transceiver, orient the FCC RF exposure label

so that it is facing the front of the Antenna This is a mandatory requirement

by the FCC to comply with RF exposure compliance requirements. The

label should not be obstructed when installation is complete. This will

allow the warning label to be visible and readable. This is a mandatory

requirement by the FCC to comply with RF exposure compliance

requirements

131908/2

N/A

12 in. (30 cm)

22 in. (55 cm)

12 in. (30 cm)

Limits, Minimum

Standalone (when used with 24 dBi)

26 in. (66 cm)

48 in. (122 cm)

26 in. (66 cm)

. The following

N/A

C+A