Whirlpool WGD7300DW Manual de instruções de instalação - Página 21
Procurar online ou descarregar pdf Manual de instruções de instalação para Secador Whirlpool WGD7300DW. Whirlpool WGD7300DW 44 páginas. Gas and electric dryer 29" wide models
Também para Whirlpool WGD7300DW: Manual de utilização e cuidados (40 páginas)
Imprimir página
7.
Check for leaks
Check for leaks around "Y" connector, faucet, and hoses.
CONNECT VENT
1.
Connect vent to exhaust outlet
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is
clean. Dryer vent must fit over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood
with a 4" (102 mm) clamp.
2.
Move dryer to final location
Move dryer to final location. Avoid crushing or kinking vent.
LEVEL DRYER
1.
Level dryer
Check levelness of dryer from side to side. Repeat from
front to back.
NOTE: The dryer must be level for the moisture sensing system
to operate correctly.
Not Level
2.
Tighten and adjust leveling legs
If dryer is not level or the same height as the washer, prop up
using a wood block. Use wrench to adjust legs up or down,
and check again for levelness. Once legs are level, make sure
all four legs are snug against the floor before tightening them.
LEVEL
Not Level
21