Whirlpool WGD8300S Manual de utilização e cuidados - Página 10
Procurar online ou descarregar pdf Manual de utilização e cuidados para Secador Whirlpool WGD8300S. Whirlpool WGD8300S 48 páginas. Dimensions
Também para Whirlpool WGD8300S: Dimensões e informações de instalação (1 páginas), Dimensões (1 páginas)
Imprimir página
Exhaust
Recommended
hood styles are shown here.
_.
(1j4"!rn)
(10.2 cm)
A. Louvered hood style
B. Box hood style
The angled hood style (shown here) is acceptable.
4"
(10.2 cm)__
v 0 2Jfm
•
An exhaust hood should cap the vent to keep rodents and
insects from entering the home.
•
Exhaust hood must be at least 12" (30.5 cm) from the ground
or any object that may be in the path of the exhaust (such as
flowers, rocks or bushes, snow line, etc.).
•
Do not use an exhaust hood with a magnetic latch.
improper venting can cause moisture
and lint to collect
indoors, which
may result in:
[] Moisture damage to woodwork,
furniture, paint, wallpaper,
carpets, etc.
[] Housecleaning
problems and health problems.
Choose
your exhaust installation type
Recommended
exhaust
installations
Typical installations vent the dryer from the rear of the dryer.
Other installations are possible.
B
A=--
!!
......... c
...............................
F
....................................
G
Optional exhaust installations
Fire Hazard
Cover unused exhaust
holes with the following
kit:
279818 (white)
Contact your local dealer.
Failure to follow
these instructions can result in death,
fire, electrical
shock, or serious injury.
This dryer can be converted to exhaust out the right side, left
side, or through the bottom. Contact your local dealer to have the
dryer converted.
A
B
A. Standard rear offset exhaust installation
B. Left or right side exhaust installation
C. Bottom exhaust installation (not an option
with pedestal installations)
Alternate
installations for close clearances
Venting systems come in many varieties. Select the type best for
your installation. Two close-clearance
installations are shown.
Refer to the manufacturer's
instructions.
1
"<?jzz-J_
1
J
A
B
A. Over-the-top
installation
(also available with one
offset elbow)
B. Periscope installation
NOTE: The following kits for close clearance alternate
installations are available for purchase. Please see the
"Assistance
or Service" section of this manual to order.
A. Dryer
B. Elbow
C. Wall
D. Exhaust hood
E. Clamps
F. Rigid metal or flexible metal vent
G. Vent length necessary to connect elbows
H. Exhaust outlet
10