Whirlpool WGD9151YW Manual de utilização e cuidados - Página 9
Procurar online ou descarregar pdf Manual de utilização e cuidados para Secador Whirlpool WGD9151YW. Whirlpool WGD9151YW 40 páginas. Installation guide
Também para Whirlpool WGD9151YW: Manual do utilizador (32 páginas), Manual de instruções (8 páginas), Manual de instalação (36 páginas)
Imprimir página
CYCLE GUIDE — MANUAL AND STEAM CYCLES
Steam model
Adjusting drying time on Manual Cycles
When you select a Manual Cycle, the
default time appears in the display.
Use the More Time s and Less Time t
buttons to increase or decrease the
Sensing
Wet
Damp
time in 1 minute increments. Press
and hold to change the time in
5 minute increments.
The maximum dry time is 100 minutes.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (Air Dry) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle:
Items to dry:
Any load
Timed Dry
NOTE: Select Air
Dry to dry foam,
rubber, plastic, or
heat-sensitive
fabrics.
Small loads and
Small Load
sportswear
(non-steam
models only)
Mixed Loads
Touch Up
(non-steam
models only)
Shirts, blouses,
Quick Refresh
and slacks
(Steam
models only)
Mixed Loads
Enhanced
Touch Up
(Steam
models only)
Sensing
Wet
Non-Steam model
Drying
Default
Temperature:
Time:
High
40
Medium
Low
Extra Low
Air Dry
27
High
Medium
Low
Extra Low
Air Dry
20
High
Medium
Low
Extra Low
Air Dry
Medium
15
20
High
Medium
Settings and options shown in bold are default settings
for that cycle.
Steam
Control Lock
Not all features and cycles are available on all models.
Damp
Cool
Done
Wrinkle
Sensing
Wet
Down
Not all settings and options are available on each cycle.
Shield
Steam cycles (on some models) are designed for use
with dry loads to loosen wrinkles, reduce odors, and
refresh fabrics.
Using Air Dry
Use the Air Dry temperature setting with Manual Cycles for
items that require drying without heat such as rubber, plastic,
and heat-sensitive fabrics. This chart shows examples of items
that can be dried using Air Dry.
Type of Load
Foam rubber – pillows, padded bras,
stuffed toys
Plastic – shower curtains, tablecloths
Rubber-backed rugs
Olefin, polypropylene, sheer nylon
*Reset time to complete drying, if needed.
When using Air Dry:
• Check that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during the cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Dry can only be used with Manual Cycles.
Available
Options:
Wrinkle Shield
Use to dry items to a damp level, or for items that
™
do not require an entire drying cycle. Select a drying
temperature based on the type of fabrics in your
load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the
higher setting.
Wrinkle Shield
For small loads of 3-4 items.
™
Wrinkle Shield
Use to reduce wrinkles, including from loads left in
™
the dryer too long. Cycle run time may be manually
adjusted, but Temperature is selectable.
Wrinkle Shield
Use to reduce odors and light wrinkles.
™
NOTE: Do not add dryer sheets.
Wrinkle Shield
Use to reduce wrinkles, including from loads left in
™
the dryer too long. Cycle run time may be manually
adjusted, and Temperature is selectable.
NOTE: Do not add dryer sheets.
Control Lock
Damp
Cool
Done
Wrinkle
Down
Shield
Cycle Details:
Est. Time*
(Minutes)
20–30
20–30
40–50
10–20
9