Whirlpool WGD9450WR Manual de instruções de instalação - Página 16

Procurar online ou descarregar pdf Manual de instruções de instalação para Secador Whirlpool WGD9450WR. Whirlpool WGD9450WR 32 páginas. Gas/electric

Imprimir página

Dryer Results

Clothes are not drying satisfactorily,

drying times are too

long, or load is too hot

•

Is the lint screen clogged with lint?.

Lint screen should be cleaned before each load.

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death

or fire.

Is the exhaust vent or outside exhaust hood clogged with

lint, restricting air movement?

Run the dryer for 5-10 minutes. Hold your hand under the

outside exhaust hood to check air movement. If you do not feel

air movement, clean exhaust system of lint or replace exhaust

vent with heavy metal or flexible metal vent. See the Installation

Instructions.

Are fabric softener sheets blocking

the grille?

Use only one fabric softener sheet, and use it only once.

Is the exhaust vent the correct length?

Check that the exhaust vent is not too long or has too many

turns. Long venting will increase drying times. See the

Installation Instructions.

Is the exhaust vent diameter the correct size?

Use 4" (102 ram) diameter vent material.

Is the dryer located in a room with temperature

below 45°F

(7°C)?

Proper operation of dryer cycles requires temperatures above

45°F (7°C).

Explosion

Hazard

Keep flammable

materials

and vapors,

such as

gasoline, away from dryer.

Place dryer at least 18 inches (460 ram) above the floor

for a garage installation.

Failure to do so can result in death, explosion,

or fire.

Is the dryer located in a closet?.

Closet doors must have ventilation openings at the top and

bottom of the door. The front of the dryer requires a minimum of

1" (25 ram) of airspace, and, for most installations, the rear of the

dryer requires 5" (127 ram). See the Installation Instructions.