Whirlpool WGD94HEAC Manual de instruções de instalação - Página 14
Procurar online ou descarregar pdf Manual de instruções de instalação para Secador Whirlpool WGD94HEAC. Whirlpool WGD94HEAC 44 páginas. 7.4 cu. ft. duet steam gas dryer with advanced moisture sensing
Também para Whirlpool WGD94HEAC: Manual de instruções (8 páginas), Manual de utilização e cuidados (40 páginas)
Imprimir página
CONNECT VENT
1.
Connect vent to exhaust outlet
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is
clean. Dryer vent must fit over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood
with a 4" (102 mm) clamp.
2.
Move dryer to final location
Move dryer to final location, taking care not to crush or
kink vent or flexible gas line.
After dryer is in place, remove corner posts and cardboard
from under dryer.
14
LEVEL DRYER
1.
Level dryer
Place
level here
Check levelness of dryer from
side to side. Repeat from front to back.
NOTE: The dryer must be level for the moisture sensing system
to operate correctly
Not Level
2.
Adjust leveling legs
If dryer is not level, prop up using a wood block, use wrench
to adjust legs up or down, and check again for levelness.
Once dryer is level, make sure all four legs are snug against
the floor and the dryer does not rock.
LEVEL
Not Level