Whirlpool YLEW0050PQ0 Manual de utilização e cuidados - Página 15

Procurar online ou descarregar pdf Manual de utilização e cuidados para Secador Whirlpool YLEW0050PQ0. Whirlpool YLEW0050PQ0 32 páginas. 240.volt electric dryer

Imprimir página

Explosion

Hazard

Keep flammable materials and vapors, such as

gasoline,

away from dryer.

Place dryer at least 18 inches (46 cm) above the floor

for a garage installation.

Failure to do so can result in death, explosion,

or fire.

•

Is the dryer located

in a room with temperature

below

45°F (7°0)?

Proper operation of dryer cycles requires temperatures

above

45°F (7°C).

•

Is the dryer located

in a closet?

Closet doors must have ventilation openings at the top and

bottom of the door. The rear of the dryer requires a minimum

of 51/2 '' (14 cm) of airspace, and 1" (2.5 cm)is recommended

for the sides and front of the dryer. See the Installation

Instructions,

•

Is the load too large and heavy to dry quickly?

Separate the load to tumble freely,

Cycle time too short

Excessive

Weight Hazard

Use two or more people to move and install dryer.

Failure to do so can result in back or other injury.

•

Is the automatic

cycle ending early?

The load may not be contacting

the sensor strips. Level the

dryer.

Change the dryness level setting on Automatic

Cycles.

Increasing or decreasing the dryness level will change the

amount of drying time in a cycle.

Lint on load

•

Is the lint screen clogged?

Lint screen should be cleaned before each load.

Stains on load or drum

•

Drum stains are caused by dyes in clothing (usually blue

jeans). This will not transfer to other clothing.

Loads are wrinkled

•

Was the load removed from dryer at the end of the cycle?

•

Was the dryer overloaded?

Dry smaller loads that can tumble freely,

Odors

Have you recently been painting,

staining

or varnishing in

the area where your dryer is located?

If so, ventilate the area. When the odors or fumes are gone

from the area, rewash and dry the clothing.

•

Is the dryer being used for the first time?

The new electric heating element may have an odor, The odor

will be gone after the first cycle.

ASSISTANCE ORSERVICE

Before calling for assistance or service, please check

"Troubleshooting."

It may save you the cost of a service call. If

you still need help, follow the instructions

below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement

parts

If you need to order replacement parts, we recommend that you

use only FSP _ factory specified parts. These parts will fit right

and work right because they are made with the same precision

used to build every new WHIRLPOOL _ appliance.

To locate FSP replacement

parts in your area:

Call 1-800-807-6777,

or your nearest designated service center.

Our consultants

provide assistance with:

•

Features and specifications

on our full line of appliances.

•

Use and maintenance procedures.

•

Accessory and repair parts sales.

Referrals to local dealers, repair parts distributors,

and

service companies. Whirlpool Canada LP designated service

technicians are trained to fulfill the product warranty and

provide after-warranty

service anywhere in Canada.

For further

assistance

If you need further assistance, you can write to Whirlpool Canada

LP with any questions or concerns at:

Customer Interaction Centre

Whirlpool Canada LP

1901 Minnesota Court

Mississauga,

Ontario L5N 3A7

Please include a daytime phone number in your correspondence.