Whirlpool YWED7990XG0 Manual de instruções de instalação - Página 10

Procurar online ou descarregar pdf Manual de instruções de instalação para Secador Whirlpool YWED7990XG0. Whirlpool YWED7990XG0 32 páginas. Gas dryer

Rigid metal vent:

Recommended for best drying performance and to avoid

■

crushing and kinking.

Flexible metal vent:

(Acceptable only if accessible to clean)

Must be fully extended and supported in final dryer location.

■

Remove excess to avoid sagging and kinking that may

■

result in reduced airflow and poor performance.

Do not install in enclosed walls, ceilings, or floors.

■

The total length should not exceed 7

■

NOTE:

If using an existing vent system, clean lint from

entire length of the system and make sure exhaust hood

is not plugged with lint. Replace plastic or metal foil vents

with rigid metal or flexible metal vents. Review Vent System

Chart and if necessary, modify existing vent system to

achieve best drying performance.

Exhaust hoods:

Must be at least 12" (305 mm) from ground or any object that

■

may obstruct exhaust (such as flowers, rocks, bushes, or

snow).

Recommended Styles:

Louvered Hood

Acceptable Style:

Angled Hood

ft. (2.4 m).

Box Hood

Elbows:

45° elbows provide better airflow than 90° elbows.

■

Recommended Styles:

90˚ elbow

Clamps:

Use clamps to seal all joints.

■

Exhaust vent must not be connected or secured with screws

■

or other fastening devices that extend into interior of duct

and catch lint. Do not use duct tape.

45˚ elbow