Calandra Racing Concepts Gen-X 10 Manual de montagem - Página 7

Procurar online ou descarregar pdf Manual de montagem para Carro de brincar motorizado Calandra Racing Concepts Gen-X 10. Calandra Racing Concepts Gen-X 10 19 páginas.

Imprimir página

Damper Tubes

Bag 5

4-40 x 5/16"

set screw

Completed Tube

Damper Tube to Chassis assembly

Snap the assembled & lubed damper tubes on the

respective points as shown in the diagram to the right.

You will find it easier to snap on the centered, smaller

2-56 ball studs first, then pop the outer, larger 4-40

ballcups on.

2-56 set-

screw stud

2-56 Plastic

Ball Cup

.188 "

.035"

Allen Driver

Short 4-40 Plastic

Ball Cup (on tree)

.125 "

1 - Use the small allen key [30] to drive the 2-56 set screw

stud [31] into the thin plastic ball cup [32].

2 - Leave about 3/16" (half the set screw length) protruding

from the ball cup.

3 - Do the same for the short 4-40 ballcup [33]. Use the 4-40

x 5/16" set screw [25] and the slighty larger .050" allen key.

Leave about 1/8" protruding.

4 - Thread the 2 ball cups into their respective tube halves

per the diagram. Finger tighten.

5 - Add CRC Tube Lube [34] to each slot on the delrin

plunger [35]. Build the tube and be sure it has smooth,

damped action. *** Note, fill only the slots, not the entire

aluminum tube [36]. ***

Delrin Plunger

Aluminum Tube