AER amp one Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Amplificador AER amp one. AER amp one 12 páginas. Aer bottom-line series amp one user manual
Imprimir página
2. Safety Instructions
The following instructions help to minimize the risk of
injury through fire and electric shock.
1. Read these safety instructions carefully prior to using
the device.
2. Keep these safety instructions in a safe place.
3. Do not install or use your device in close proximity to
water, liquids or with wet hands!
4. Use your device in a safe place where nobody can
step on cables or trip over them – damaging the cables,
the device or themselves!
5. Pay attention to air flow and cooling – never obst-
ruct any air vents or grilles or cover it and allow it to
overheat.
6. Unplug from the mains before cleaning the device.
Use only a dry cloth for cleaning – no detergents or
cleansers – ensure that no liquid ever enters the unit.
3. Controls and Connections
4
5
2
1
3
3.1 Front Side
input
1)
high/low
2)
gain
3)
clip
4)
5)
mute LED
6)
mute
colour
7)
bass
8)
9)
bass boost
10)
middle
11)
freq.
bandwidth
12)
treble
13)
balance
14)
15)
intensity
4
6
7
9
8
signal input - socket für 6.3 mm mono jackplug
input sensitivity switch, attenuator:
input level control
overload indicator
channel mute indicator
channel mute switch:
tone colour filter activation switch:
low frequency level control
low frequency boost:
middle frequency level control
middle frequency control
middle bandwidth switch
treble frequency level control
tone balance emphasis control
tone balance level control
7. Never install your device close to devices with strong
electromagnetic fields such as large mains transfor-
mers, electrical motors, neon illumination etc. Do not
lay signal cables parallel to power current cables.
8. There are no user-serviceable components inside
your device. To avoid the hazard of an electric shock,
the unit must not be opened. All maintenance, adjust-
ment and repair work must be performed by qualified
technicians only. Any unauthorized tampering will void
the 2-year warranty.
9. To comply with the EMV requirements, shielded
cables with correctly fitted connectors must be used for
all signal connections.
10. Please connect audio connections before powering
the unit.
12
10
11
13
deactivated
deactivated
deactivated
deactivated
acitve
14
15
16
acitve
acitve
acitve
18
21
19
20
17
equalizer
tone balance