Whirlpool 857867201000 Manual - Página 32

Procurar online ou descarregar pdf Manual para Campânula de ventilação Whirlpool 857867201000. Whirlpool 857867201000 36 páginas.

Imprimir página

SAFEGUARDING THE ENVIRONMENT

1. Packing

Packaging materials are 100% recyclable and are marked with the

recycling symbol

. Dispose of the appliance in conformity with

local environmental regulations. Packaging materials (plastic bags,

polystyrene, etc.) can be dangerous for children and should be kept

well out of their reach.

2. Product

This appliance is marked according to the European directive 2002/

96/EC, Waste Electrical and Electronic Equipment (WEEE).

By ensuring that this appliance is scrapped suitably, you can help

prevent potentially damaging consequences for the environment and

health.

The symbol

on the product or the accompanying documentation

indicates that this product should not be treated as domestic waste

but must be taken to a suitable collection centre for the recycling of

electrical and electronic equipment.

Disposal must be carried out in accordance with local environmental

regulations for waste disposal.

For further information on the treatment, recovery and recycling of

this product, contact the competent local office, the household

waste collection service or the shop where you purchased the

appliance.

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

IMPORTANT!

•

The appliance is not intended for use by young children or

persons with restricted physical, sensory or mental

abilities or without experience and knowledge of the

appliance, unless they are under the supervision or

instruction of a person responsible for their safety.

•

Children must be supervised to ensure that they do not play

with the appliance.

1. Do not connect the appliance to the mains power supply until

installation has been completed. Always disconnect the hood

before cleaning or carrying out maintenance by unplugging it or

switching off the power supply.

2. Do not "flambé" food under the hood. Naked flames could

cause a fire.

3. Do not leave pans unattended when frying. Cooking oil can catch

fire.

4. Regular cleaning and maintenance is essential to correct

functioning and good performance. Regularly remove dirt

deposits. Regularly clean or replace filters. Never use flammable

materials as hoses for extracted air.

5. If the hood is used together with other appliances powered by

gas or other fuels, ambient negative pressure must not exceed

-5

4 Pa (4 x 10

bar). For this reason, make sure the room is

adequately ventilated.

6. Exhaust air must not be conveyed through the same flue used by

the heating system or other appliances powered by gas or other

fuels.

7. The room must be adequately ventilated when the hood is used

together with appliances powered by gas or other fuels.

8. Make sure lamps are cold before touching them.

9. Exhaust air must not be conveyed through a flue used for

removal of fumes produced by gas combustion appliances or

other combustible materials, but must have an independent

outlet.

All national regulations governing extraction of fumes must be

observed.

10. The hood is not a shelf, therefore do not overload or place

objects on it.

11. Do not use or leave the hood without its lamps correctly

installed - risk of electric shock.

Note: Always wear work gloves for all installation and maintenance

operations.

5019 300 01026

Electrical connections

The mains power supply must match the voltage given on the

dataplate located inside the hood. If provided with a plug, connect

the hood to a power socket complying with current regulations and

located in an accessible area. If it does not have a plug (direct

connection to the power supply) or if the socket is not in an

accessible place, fit a suitable double-pole switch that ensures

complete disconnection from the power supply in category III

overvoltage conditions, complying with the installation rules.

IMPORTANT: Before reconnecting the hood circuit to the

mains power supply and checking correct operation, make

sure the power cable is correctly fitted and that it was NOT

crushed in the housing during installation.

Cleaning the hood

Warning! Failure to remove oil/grease (at least once a month) could

result in fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

Before using the hood

To ensure best use of your hood, please read these instructions

carefully and keep them for future reference.

Packaging materials (plastic bags, polystyrene, etc.) can be dangerous

for children and should be kept well out of their reach.

Make sure the hood was not damaged during transport.

Declaration of conformity

This product has been designed, manufactured and sold in

conformity to the following standards:

safety objectives of "Low Voltage" Directive 2006/95/CE

(which replaces 73/23/CEE as amended)

protection requirements of the "EMC" Directive 89/336/CEE

amended by Directive 93/68/CEE.

Troubleshooting guide

The hood does not work:

•

Is the plug properly inserted in the power socket?

•

Is there a power failure?

The hood is not extracting enough:

•

Is the right speed selected?

•

Do the filters need cleaning or changing?

•

Are the air outlets blocked?

The light does not work:

•

Does the lamp need replacing?

•

Is the lamp correctly fitted?

AFTER-SALES SERVICE

Before calling the After-Sales Service

1. Check to see if you can solve the problem yourself (see

"Troubleshooting guide").

2. Switch the hood off and then on again to check if the problem

has been eliminated.

3. If the problem persists, contact the After-sales Service.

Specify:

•

the nature of the problem,

•

the product model given on the dataplate inside the hood, visible

on removing the grease filters,

•

your full address,

•

your telephone number and area code,

•

the Service code (the number under the word SERVICE on the

dataplate inside the hood, behind the grease filter).

If any repairs are needed, contact an authorized Service Centre (to

ensure that only original spare parts are used and that repairs are

made correctly).

Failure to comply with these instructions can compromise the safety

and quality of the product.

RUS

UKR