Whirlpool AKR 968 Manual de instalação - Página 8

Procurar online ou descarregar pdf Manual de instalação para Campânula de ventilação Whirlpool AKR 968. Whirlpool AKR 968 8 páginas.

Imprimir página

SAFEGUARDING THE ENVIRONMENT

1. Packaging

Packaging materials are 100% recyclable and are marked with the

recycling symbol

.Dispose of the appliance in conformity with

local environmental regulations. Packaging materials (plastic bags,

polystyrene, etc.) can be dangerous for children and should be kept

well out of their reach.

2. Product

This appliance is marked in compliance with European Directive

2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).

By ensuring that this appliance is scrapped suitably, you can help

prevent potentially damaging consequences for the environment and

health.

The symbol

on the product or the accompanying documentation

indicates that this product should not be treated as domestic waste

but must be taken to a suitable collection centre for the recycling of

electrical and electronic equipment.

Disposal must be carried out in accordance with local environmental

regulations for waste disposal.

For further information on the treatment, recovery and recycling of

this appliance, contact your competent local authority, the collection

service for household waste or the shop where you purchased the

appliance.

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

WARNING!

•

The appliance is not intended for use by young children or

persons with restricted physical, sensory or mental

abilities or without experience and knowledge of the

appliance, unless they are under the supervision or

instruction of a person responsible for their safety.

•

Children must be supervised so that they do not play with

the appliance.

1. Do not connect the appliance to the electrical power supply

until installation is completed. Always disconnect the hood

before cleaning or carrying out maintenance by unplugging it or

switching off the power supply.

2. Do not "flambé" food under the hood. Naked flames could

cause a fire.

3. Do not leave pans unattended when frying. Cooking oil can

catch fire.

4. Regular cleaning and maintenance is essential to correct

functioning and good performance. Regularly remove dirt

deposits. Regularly clean or replace filters. Never use flammable

materials as hoses for extracted air.

5. If the hood is used together with other appliances powered by

gas or other fuels, ambient negative pressure must not exceed

-5

4 Pa (4 x 10

bar). For this reason, make sure the room is

adequately ventilated.

6. Exhaust air must not be conveyed through the same flue used by

the heating system or other appliances powered by gas or other

fuels.

7. The room must be adequately ventilated when the hood is used

together with appliances powered by gas or other fuels.

8. When replacing the bulbs, first ensure that they are cold.

9. The discharge air must not be ducted to a flue used for removing

fumes produced by appliances using gas or other fuels, but must

have a separate outlet.

All national regulations on air discharge must be observed.

10. The hood is not a shelf, therefore do not overload or place

objects on it.

11. Do not use or leave the hood without its lamps correctly

installed - risk of electric shock.

Note: always wear work gloves for all installation and maintenance

operations.

5019 318 33259

Electrical connections

The mains power supply must correspond to the voltage indicated

on the appliance rating plate located inside the hood. If provided

with a plug, connect the hood to a power socket complying with

current regulations and located in an accessible area. If it does not

have a plug (direct connection to the power supply) or if the socket is

not in an accessible place, fit a suitable double-pole switch that

ensures complete disconnection from the power supply in category

III overvoltage conditions, complying with the installation rules.

WARNING: Before reconnecting the hood circuit to the

power supply and checking correct operation, always make

sure the power cable is correctly fitted and that it was NOT

crushed in its housing during installation.

Cleaning the hood

Important! Failure to remove oil/grease (at least once a month)

could result in fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

Before using the hood

Please read these instructions carefully and keep them for future

reference, in order to ensure best use of your hood.

Packaging materials (plastic bags, polystyrene, etc.) can be

dangerous for children and should be kept well out of their reach.

Make sure the hood has not been damaged during transport.

Declaration of conformity

This product has been designed, manufactured and sold in

conformity to the following standards:

safety objectives of the "Low Voltage"

Directive 2006/95/CE (which replaces 73/23/CEE and

subsequent amendments)

protection requirements of "EMC" Directive 89/336/EEC

amended by Directive 93/68/EEC.

Troubleshooting guide

The hood does not work:

•

Is the plug properly inserted in the power socket?

•

Is there a power failure?

The hood is not extracting efficiently:

•

Is the right speed selected?

•

Do the filters need cleaning or replacing?

•

Are the air outlets blocked?

The light does not work:

•

Does the bulb need replacing?

•

Is the bulb correctly fitted?

AFTER-SALES SERVICE

Before calling the After-sales Service

1. Check to see if you can fix the problem yourself (see

"Troubleshooting Guide").

2. Switch the hood off and then on again to check if the problem

has been eliminated.

3. If the problem persists, contact the After-sales Service.

Specify:

•

the nature of the problem,

•

the product model given on the dataplate inside the hood, visible

on removing the grease filters,

•

your full address,

•

your telephone number and area code,

•

the Service code (the number under the word SERVICE on the

dataplate inside the hood, behind the grease filter).

If any repairs are necessary, contact an authorised Service Centre (to

ensure the use of original spare parts and correct repair).

Failure to comply with these instructions may compromise the safety

and quality of the product.