Whirlpool AKT3570/IX Manual de Saúde e Segurança, Utilização e Cuidados e Instalação - Página 5
Procurar online ou descarregar pdf Manual de Saúde e Segurança, Utilização e Cuidados e Instalação para Campânula de ventilação Whirlpool AKT3570/IX. Whirlpool AKT3570/IX 24 páginas.
![Whirlpool AKT3570/IX Manual de Saúde e Segurança, Utilização e Cuidados e Instalação](/uploads/products/server2/6872578/6872578.jpg)
After unpacking the appliance, check for any transport damage. Do not install the appliance if it has been damaged.
In the event of problems, contact Whirlpool Customer Service. To prevent any damage, only remove the appliance
from its polystyrene foam packaging at the time of installation.
• Packing materials (plastic bags, polystyrene, etc.) must be kept out of children's reach, as they are potentially
dangerous.
• Installation must be carried out by a qualified technician.
•
Make sure the power voltage specified on the appliance's rating plate is the same as the main voltage.
• Connect the power and switch on the motor and lighting system to check the operation.
•
Parts supplied:
a. Detachable oil cup x 1 pc
b. Duct cover assembly x 1 set
. Warranty card 1pc and Instruction manual 1 pc
c
x
d. Hardware package x 1 set
(M6 x 1" wooden screw x 4 pcs + washer x 4 pcs + 3/16" x 3/8" flat screw x 2 pcs + M4 x 8 screw x 2 pcs)
e.
Duct cover backet x 1pc
1. Location
• Air turbulence from window/door may reduce the effectiveness of hood.
Suggest to close window door before using hood .(FIG. 1)
• The smoke has to rise up to 25 mm from cook top in order to reach hood's
suction efficiency range.
2. Position
• The installation height is measured vertically from center of aluminum
filter of hood to the top of the cook top .
• The min height is 650mm and the max installation height is 750mm for
gas hob.(FIG. 2)
• Avoid left-right or front-dropped inclination.(FIG. 3)
3. Exhaust duct
"
• 6 diameter exhaust duct is recommended to use in order to maximize
suction efficiency.
• Before installing the hood, please apply fast drying glue to the collar and
securely attach it to the top of cooker hood's vent lid. Install the cooker
hood and exhaust duct to the plastic collar and seal with fast drying glue.
B
B
U
U
efore
efore
sing he
sing he
x
I
I
nstallation
nstallation
/
0
T
T
H
H
ood
ood
3
(
FIG.1
)
(
FIG.2
)
(
FIG.3
)