Whirlpool UXT4030AYB0 Instruções de instalação e manual de utilização e cuidados - Página 12
Procurar online ou descarregar pdf Instruções de instalação e manual de utilização e cuidados para Campânula de ventilação Whirlpool UXT4030AYB0. Whirlpool UXT4030AYB0 36 páginas. 30" (76.2 cm) and 36" (91.4 cm) range hoods
Me<® E
Connect on
Electrical
Shock Hazard
Disconnect
power before servicing.
Replace all parts and panems before operating.
Failure to do so can resumt in death or electrical
shock.
1. Disconnect
power.
F
E
A. White wires
B. Black wires
C. UL fisted wire connector
D. Green (or bare) ground wire
E. Home power supply cable or
power cord accessory kit
F. UL fisted or CSA approved
V2" strain relief
G. Green ground screw
2. Use UL listed wire connectors
and connect white wires (A)
together.
3. Use UL listed wire connectors
and connect black wires (B)
together.
Fire Hazard
Electrically
ground
the blower.
Use copper
wire.
Connect ground wire to green ground screw in
terminal
box.
Failure to do so can resumt in death, fire, or
electrical
shock.
4. Connect green (or bare) ground wire from power supply to
green ground screw in terminal box and securely tighten.
5. Install terminal box cover.
6. Reconnect power.
Con, }p @e
1. For some models, Install the 75W (max.) Incandescent
light
bulb. See "Replacing the Incandescent
light bulb" section.
2. Replace grease filter if removed. See the "Range Hood Care"
section.
3. Check the operation of the range hood fan and light. See
"Range Hood Use" section.
If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect
power and check wiring connections.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the
kitchen.
Depending on your model, the hood controls are located on the
top or front panel of the range hood.
UXT20, UXT30, UXT40 and UXT42 Series Models
A
%
B
C
A. Incandescent
light housing and cover
B. Grease filter retainer
C. Grease filter
UXT52 Series Models
A
C
A. Halogen lights
B. Grease filter retainer
C. Grease filter
12