Backyard Pro 554HPSQRBLK Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Aquecedor de pátio Backyard Pro 554HPSQRBLK. Backyard Pro 554HPSQRBLK 18 páginas. Tower patio heater

Imprimir página

Backyard Pro 554HPSQRBLK Manual de instruções

OPERATION INSTRUCTIONS

LEAK CHECK

WARNING

• Perform all leak tests outdoors.

• Extinguish all open flames.

• NEVER leak test when smoking.

• Do not use the heater until all connections have been

leak tested and do not leak.

1. Make 2-3 oz. of leak check solution (one part liquid dishwashing detergent and three parts

water).

2. Apply several drops of solution where hose attaches to regulator.

3. Apply several drops of solution where regulator connects to cylinder.

4. Make sure all patio heater and light valves are OFF.

5. Turn cylinder valve ON.

If bubbles appear at any connection, there is a leak.

1. Turn cylinder valve OFF.

2. If leak is at hose/regulator connection: tighten connection and perform another leak test. If

bubbles continue appearing, the hose should be returned to the place of purchase.

3. If leak is at regulator/cylinder valve connection: disconnect, reconnect, and perform another

leak check. If you continue to see bubbles after several attempts, cylinder valve is defective

and should be returned to cylinder's place of purchase. If NO bubbles appear at any

connection, the connections are secure. NOTE: Whenever gas connections are loosened or

removed, you must perform a complete leak test.

4. Complete installation.

OPERATION INSTRUCTIONS

1. Make 2-3 oz. of leak check solution (one part liquid dishwashing

2. Apply several drops of solution where hose attaches to regulato

3. Apply several drops of solution where regulator connects to cyli

4. Make sure all patio heater and light valves are OFF.

5. Turn cylinder valve ON.

If bubbles appear at any connection, there is a leak.

1. Turn cylinder valve OFF.

2. If leak is at hose/regulator connection: tighten connection and p

continue appearing, the hose should be returned to the place of pu

3. If leak is at regulator/cylinder valve connection: disconnect, reco

check. If you continue to see bubbles after several attempts, cylind

returned to cylinder's place of purchase.

If NO bubbles appear at any connection, the connections are

NOTE: Whenever gas connections are loosened or removed, you

4. Complete installation.

Leak Check