Backyard Pro 554PH1STL Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Aquecedor de pátio Backyard Pro 554PH1STL. Backyard Pro 554PH1STL 14 páginas.

WARNING

Remove plastic protective coating on reflector panel (A)

and center reflector (B) before assembling!

7. Slide two reflector panels (A) together and

assemble the outer rim using one small screw

(LL) and one cap nut (KK). Repeat this step with

the third reflector panel (A). Once completed,

place the center reflector (B) in the middle and

fasten using three M6 screws (AA) and three cap

nuts (KK). Righten all screws tightly.

8. Attach the reflector assembly made in step 7 to

the top of the reflector studs (FF) on the head

assembly (C). Fasten with six flat washers (HH)

and three wing nuts (GG).

9. Unscrew the four screws that are preassembled

on the head assembly (C). Place the head

assembly (C) into the top of the post (D) by

inserting the regulator (H) into the post (D).

Tightly fasten the previously removed screws

back into the head assembly (C) through the slots

at the top of the post (D).

ASSEMBLY INSTRUCTIONS