Clarinet Systems EtherUSB EA104 Manual do utilizador - Página 15

Procurar online ou descarregar pdf Manual do utilizador para Ponto de acesso sem fios Clarinet Systems EtherUSB EA104. Clarinet Systems EtherUSB EA104 19 páginas. Usb ethernet access point for pda
Também para Clarinet Systems EtherUSB EA104: Especificações (2 páginas), Especificações (2 páginas), Manual do utilizador (11 páginas), Manual do utilizador (15 páginas)

Imprimir página

APPENDIX B – WINDOW MOBILE 5.0 DEVICE

Firmware V02.00.00 dated 8/22/2007 supports simultaneous operation of multiple WM5.0 mobile

devices such as PDAs and smartphones, which was unsupported in earlier firmware versions.

In order to support multiple WM5.0 devices, the WM5.0 device must be set up as follows:

A) Configure the WM5.0 device for RNDIS Sync mode (the default mode)

This can be configured at Settings\Connections\ActiveSync Mode\RNDIS Sync Mode. If there is no

Settings\Connections\ActiveSync Mode, the WM5.0 device is likely set at default mode.

If you do not see Settings\Connections\ActiveSync Mode but want to confirm the settings:

1. Go to the mobile device manufacturer's website and download the latest ROM/firmware to update to your

WM5.0 devices.

2. Check the device manufacturer's software section webpages and determine if there is ActiveSync Mode

Switcher/Changer available for download.

3. Once you download and install the firmware and/or application, the ActiveSync Mode Switcher can be

found at Start->Setting->Connections.

B) Use Clarinet Systems' "EtherUSB Client" application to enable multiple WM5.0 connections to

EA104. (You will only need to do this once for each device.)

EtherUSB Client offers the following functions for WM5.0 devices:

Display device's current setting

Input USB IP Group value used by EtherUSB EA104

Assign one ID from 49 choices for each WM5.0 device

Apply Setting

Restore Default setting

Download "EtherUSB Installer" from http://www.clarinetsys.com/en/product-ea104.htm to a PC and use

ActiveSync to install it to a WM5.0 device.

Install "EtherUSB_Installer" to WM5.0 device:

Connect your WM5.0 device to a PC via ActiveSync and click on Explore,

Clarinet Systems, Inc.

//www.clarinetsys.com

Page 15