Caldwell Shootin' Gallery Instruções de montagem e utilização - Página 6

Procurar online ou descarregar pdf Instruções de montagem e utilização para Acessórios Caldwell Shootin' Gallery. Caldwell Shootin' Gallery 8 páginas. Motorized moving target system

Imprimir página

STEP 7: Assembling the

Battery Box to the Front Wall

Assemble the Battery Box (1000374) to the Front Wall

using two M6 Button Head Screws(1000741) and two

M6 Lock Nuts (1000743). Tighten nuts. Photo L.

STEP 8: Assembling the Front Wall

Assemble the Front Wall to Legs by four M6 Carriage

Bolts (1000746) and four M6 Lock Nuts (1000743).

Assemble the lower RH bolt and nut first. This will

allow you to use the battery box as a prop for aiding

the assembly. Next assemble the upper LH bolt and

nut. Install the remaining two bolts and nuts. Tighten

all lock nuts. Note that the Front Wall is heavy. An

assistant would be helpful for this step. Photo M.

PHOTO M

STEP 9: Wiring Inside the Battery Box

Pull the motor wires through the Battery Box grom-

met as shown in Photo N. Make sure the grommet is

securely in place.

PHOTO L

Connect one end of the Fuse Holder (1000521) to one

of the connectors on the switch. Connect the red

motor wire to the other connector on the switch.

Make sure the connections are secure. Photo O.

DO NOT INSTALL THE BATTERY UNTIL YOU

HAVE READ AND UNDERSTAND THE USAGE

INSTRUCTIONS AND COMPLETED ASSEM-

BLY OF THE UNIT.

STEP 10: Installing the Targets

Place a Target (691356) into a target bracket on the

chain as shown. Insert the Clevis Pin (1000717).

Secure using a Cotter Pin (1001702) with the two pair

of pliers as shown at the top of page 7. Be sure to

keep the Cotter Pins formed tightly against the Clevis

Pin to avoid snagging other objects. Repeat this for the

remaining seven Targets. If you need to advance the

chain to gain access to the other target brackets, you

can do so by holding one of the installed Targets and

pulling hard to overcome the motor and advance the

chain. Photos P and Q.

Instructions continued on page 7. >>>>

PHOTO N

PHOTO O