CALECTRO SenseAir A-SENSE Manual de instalação - Página 16
Procurar online ou descarregar pdf Manual de instalação para Detectores de gás CALECTRO SenseAir A-SENSE. CALECTRO SenseAir A-SENSE 17 páginas. Co2 / temperature transmitter
Imprimir página
Maintenance
The A-SENSE is basically maintenance free. An internal self-adjusting calibration
function takes care of normal long term drift associated to the CO
the highest accuracy, a time interval of five years is recommended between CO
calibrations, unless some special situations have occurred. A zero calibration can be
performed by use of a PC together with the UIP software version 5.0 (or higher). This
software and a special RS232-cable is included in the service bag Zero Calibration
Service Bag. The cable is to be connected to the UART port slide connector. For
change of control parameters and re-calibration (CO
has to be used. The check can be done on site without interfering with the ventilation
system.
This product is in accordance with the
EMC 2004/108/EC, 92/31/EEG
including amendments by the CE-marking Directive 93/68/EEC
The product fulfils the following demand:
EN 61326-1:2006, Class B equipment, Table 1 - Basic immunity test requirements
DISTRIBUTOR
Calectro AB
Box 4113
SE-426 04 VÄSTRA FRÖLUNDA, SWEDEN
Telephone: +46-(0)31-69 53 00
Telefax: +46-(0)31-29 32 91
Home
page: www.calectro.com
E-mail: [email protected]
sensor. To secure
2
and temperature) this PC tool
2
Dokument
Rev
IMA 242
1
2
Sid
16 (16)