Firetide HotClient 2100 Manual de instalação do hardware - Página 6
Procurar online ou descarregar pdf Manual de instalação do hardware para Router sem fios Firetide HotClient 2100. Firetide HotClient 2100 11 páginas. Customer premises equipment
Imprimir páginaUsing the Mounting Bracket
Figure 5. HotClient Mounting Bracket
Figure 6. HotClient Outdoor Unit Connections
Figure 7. Attaching the Bracket to the HotClient
6
CPE Hardware Guide
The bracket is designed to allow easy tilting and aiming of the HotClient device. The bracket allows
the HotClient to be mounted with its internal antenna oriented for either vertical or horizontal
polarization. It is also designed to allow mounting on either a horizontal or vertical pole. Note that
the internal antenna polarization is vertical when the connectors are pointed down.
Note that the antenna is built in to the HotClient. In general, the HotClient should face the equip-
ment it is intended to connect with. Typically this is a Firetide HotPoint AP.
There is an external antenna connector, but in most applications it is not needed. Keep the plastic
cover on this connected to prevent water from getting into the unit.
In order to avoid climbing up and down the pole twice, power up the HotClient before proceeding
with the installation. The only connection you need is the Ethernet; it provides power as well.
Attach the bracket to the back of the HotClient, using the two slotted holes shown on the right side
of the bracket, as shown in Figure 5. Select two holes on the HotClient according to the desired
orientation of the pole and the antenna, as shown in Figure 7.
December 2007